Question about 1998 Chevrolet Tahoe

1 Answer

Inside door handle

I need help to change the door handle on the inside driver door. Detailed instructions or pictures would be of great help.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 61,292 Answers

Remove the two screws in the arm rest pocket. Carefully pry around the bottom edge of the upholstered panel to release nylon stud & socket fasteners. Remove triangle trim panel at forward edge of window by prying loose the same fastener in the middle of that panel...lift upwards to remove. Lift the entire panel to unhook the top edge which hooks over the sheetmetal at the bottom of the window opening. The trim around the doorhandle is held in place by three three j-hooks which must be pressed towards the center of the handle to release. The door handle assy simply slides forward about 1/2" before coming loose from the metal in the door. You can buy extra stud & socket assemblies at a chev garage for pennies

Posted on Aug 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need written instructions on how to replace a outside driver side door handle for an 06 ford focus


Close/wind up the window. Remove the inside door panel. Be careful with power window switch and door speaker wiring connectors. Disconnect them before pulling the door panel away. Remove any plastic covers that may be glued to the door. Have a look at the door handle from inside the door. You will have some idea as to how to remove it. Usually door handles are secured by screws from the inside. Locate and remove them. Remove linkages to the door handle then pull handle form outside.

Jul 20, 2014 | 2006 Ford Focus

1 Answer

2002 Chevy Tracker ZR2 (small suv) outside, left, drivers door handle broke


You should have someone experienced with you to do this type of job, due to the complex series of tasks involved

Mar 04, 2013 | Cars & Trucks

3 Answers

How to replace exterior door handle on 2007 Versa.


You need a Torx head screwdriver T25. Open the door and on the side of the door is a small black grommet, remove grommet, inside is the torx screw you need to loosen for the lock mechanism to move. you dont need to remove the screw just loosen enough to move the lock assembly around. Once loose enough, install the door handle and tighten lock assembly back and put grommet back.
Here is a picture if you need a bit of visual clues.
http://img266.imageshack.us/img266/1218/versadoorhandlefix.jpg
_69.jpg

Nov 04, 2010 | 2007 Nissan Versa 1.8 Sl Hatchback

1 Answer

Installation instruction for the inside drivers side door handle on a 1995 Toyota Camry


Here's a great video that will show you how to fix the inside door handle on your Camry.
Tony">

Jun 23, 2010 | 1995 Toyota Camry

1 Answer

Changing rear door latch handle


Take the plastic cover off from the inside. Fairly easy, a few bolts and some plastic clips holding it on. You may be able to open it from the outside but you'll have to take the inside cover off to replace the handle anyway. This is a common problem and if you need more detailed instructions just do a search on the net.

Mar 25, 2010 | 2000 Toyota Sienna

1 Answer

Need detailed diagram of 1998 latch mechanism to remove connections from it


there is no diagram... the latch is also a non-servicable latch, so if your problems in the latch- it needs a latch. i would look more closely at the outside door handle itself as i have seen a few of them break on the E series vans.you may be able to get detailed instructions thru autozone.com or @ autozone. hope this helps and good luck

May 28, 2009 | 2003 Ford E150

1 Answer

Need to replace driver side mirror on 2005 Durango Limited Editio


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Jan 22, 2009 | 2005 Dodge Durango

1 Answer

2000 lx 470 driver door panel


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Oct 11, 2008 | 2000 Lexus LX470

Not finding what you are looking for?
1998 Chevrolet Tahoe Logo

291 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...