Question about Mitsubishi Diamante

1 Answer

1993 Mitsubishi Diamante Wagon. Engine stalls while that happens there is a clicking noise from behind dash on passenger side or possibly the center console dash area. Any assistance is greatly appreciated. Thank you!

Posted by on

  • 1 more comment 
  • neonprophet Aug 29, 2008

    You are both quite correct. I pulled out the glove box and located the module which was making the clicking sound.
    I cleaned the battery cables, no real changes.
    But then I cleaned the throttle body with carburetor cleaner as engine was running and the problem seems to be gone for now.
    I should break it down and clean it good to be sure.

    Thank all of you, and this forum for your help.
    I greatly appreciate your time and assistance.

  • bwelsh Aug 29, 2008

    I have a 2003 Mitsubishi Diamante that has a loud clicking noise coming from the glove compartment area at start up. There doesnt seem to be any negative effects to the way the car runs, but is very annoying for about a minute after start up.

  • yadayada
    yadayada May 11, 2010

    The clicking may be due to low system voltage as the engine slows down and stalls, Have you cleaned the Throttle boday?


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

It sounds as though its coming from your computer which is behind the glove compartment.

Posted on Aug 27, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Can you tell me where the TCu or TCm is located on a 1993 mitsubshi diamante

From memory the engine and transmission computers are behind the centre of the dashboard near the floor. Removing the inner lower kick panels should allow access to them.

Mar 24, 2011 | 1993 Mitsubishi Diamante

1 Answer

Ticking sound behind glove box. engine stalls

this is a problem with your cars E C U behind the glove box ,,,electronics,,replace the ecu for a second hand one or a new one,that would solve your problem

Jun 18, 2010 | 1993 Mitsubishi Diamante

4 Answers

Where the computer on the 1993 ford tempo can't find

I just changed mine, it's up under the dash on the driver's side above the fuse panel

Mar 13, 2010 | 1993 Ford Tempo

1 Answer

1993 honda accord ex drove in rain belt squeeled

Sounds like maybe the ECU had taken in some water. Is your ECM located behind the engine on the firewall? There are two large fuses located on the passenger side wheel well in the engine bay. They are two large (2" plastic covers) over them.

Jan 23, 2010 | 1993 Honda Accord

1 Answer

Location of heater blower motor

Normally located on passenger side under the dash behind the glove box.

Dec 11, 2009 | 1992 Mitsubishi Diamante

1 Answer

I have a 1993, Mitsu Diamante wagon. The fuse box label is missing. I need to know which fuse operates the parking/fog lights.

This is in the engine compartment. Take a look at it. There is one there for your fog lights...bottom rom...15 amp fuse.

Nov 19, 2009 | 1993 Mitsubishi Diamante

1 Answer

1993 Mitsubishi Diamante Wagon/ECO /idle

Eco or PWR are lights that should be on one at the time (depending on what driving mod you choose. the button locates on the gear box. it has nothing to do with ideling. what you must check is the air filter and the whole intake pipe. make sure everything fits and nothing loose. check the cables too. make sure all wiers are fully pluged in. if the problem continues check on missfiering.   after if nothing helps the cr probably needs a tune up. 

May 31, 2009 | 1993 Mitsubishi Diamante

1 Answer

I need to replace the heater core in a 97 mitsubishi eclipse

Unfortunatly there is no easy way to do this. You have to remove the entire dash to get to it. After that it's pretty easy. But it is located close to the firewall behind the dash either on the passenger side or in the middle.

Mar 01, 2009 | 1999 Mitsubishi Diamante

1 Answer

My mitsubishi diamante cuts off during idle.

hi i have the same car same problem try changing plugs and wires car is over heating then starts again when it cools off

Nov 24, 2008 | 1992 Mitsubishi Diamante

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

473 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

71231 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7001 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides