Replacing head lights

check for a damaged wire for the low beam. Also wouldn't hurt to check the ground wire as the high beam will try and ground through the low beam but not visa verse

MAY BE YOUR DIMMER SWITCH ALSO CHECK RELAYS IN FUSE BOX UNDER THE HOOD

high and low beam control by the handle S.W . this case some time it;s short togther making load on the handle s.w , it;s mark on wire and socket touch with head light bulb same mult the nutral.need to replace head lights control handle s.w . check head light bulb for short (high/low)

First check, is there more than one headlight bulb, if so, the low beam bulb has failed, needs replacing.

If not you'll probably find that the head light bulb has a double filament, low and high beam. The low beam filament has failed. You have to replace the bulb.

The wiring harnesses in the plugs behind the bulbs are burned up seperate rear of headlight cover and inspect parts available at your ford dealer

its kind of uncommon but I have seen both Low Beams burn out at the same time,but first check to see if your vehicle has a separate relay for the high beams and one for the low beams if so replace the low beam one if that is not replace both head lights,and it that is not it the only thing left is the head light switch itself.Hope this helps good luck

Pull the head light switch and check it for out put.Do you have high beams?Check the low beam headlight bulbs.If you have high beams,and low beam bulbs are good,replace the dimmer switch.

replace the dimmer switch on the steering column

thare is a high beam relay and a low beam relay in the fuse box find the low beam relay and replace it. if this dont work its probabley the switch

the head lights have tree wires goig to it one groun one gets power when high beams on the 3rd gets power only with low beam on test the wires or try by plugin a good known head light to conector if it works with low beam then replace both head ligts because head light come with two bulbs in one high and low