Question about 2006 Chrysler PT Cruiser

1 Answer

My evic center 2006 pt cruiser

My evic center quit working it is stuck i cant get it to change when i push the button it also stays on when i turn the car of can you help me

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 4 Answers

HI;
YOU CAN RE-CALIBRATE THE CLUSTER BY HOLDING DOWN THE TRIP SET BUTTON WITH THE KEY OFF THEN TURN THE KEY ON AND RELEASE THE TRIP BUTTON. THIS WILL PUT THE CLUSTER IN SELF DIAGNOSTIC MODE AND SHOULD CLEAR UP YOUR PROBLEM. MAKE SURE TO LET IT RUN TO COMPLETION BEFORE TURNING THE KEY OFF OR TO START THAT WILL ABORT THE TEST

Posted on Oct 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you change evic language from Spanish to English for a 2010 pt cruiser


Once a particular system is displayed, short and long presses of the STEP button will move the EVIC through the system menu. Pressing and holding theSTEP button once will clear the resettable function currently being displayed. Reset will only occur if a resettable function is currently being displayed. To reset all resettable functions, press and release the STEP button a second time within 3 seconds of resetting the currently displayed function (Reset ALL will be displayed during this 3 second window).
I hope this helps you, let me know if you have any trouble changing it back to english.
Thank you,
Locksmith East Aurora Ny 24 Hour Locksmith 716 249 2944 in East Aurora Ny
26245153-dnc2e1izs3stmwduc0sbwiqp-1-0.png

Jul 25, 2016 | 2010 Chrysler PT Cruiser

1 Answer

2006 pt cruiser gear shift button stuck n can't completely take key out..but button pops up on all other gear except p n 1


On your shift console there should be a small button you pop out and can poke a toothpick in to release the shifter. If you see a little cap near it that looks like it has a small slot in it, pop that up and push the button. That will release the shifter. This may be stuck requiring you to either replace the button or take it in to have it repaired.

Nov 30, 2014 | 2006 Chrysler PT Cruiser

1 Answer

How do i reset the compass on a 2006 dodge grand caravan


Hi Roger, I'm glad to help. Below is the procedure for resetting the compass on your vehicle.



COMPASS VARIATION ADJUSTMENT Compass variance, also known as magnetic declination, is the difference in angle between magnetic north and true geographic north. In some geographic locations, the difference between magnetic and geographic north is great enough to cause the compass to give false readings. If this problem occurs, the compass variance setting may need to be changed.
To set the compass variance:

1. Using the Variance Settings map, find your geographic location and note the zone number Figure 1.
22681.jpg Figure 1 - Variance Settings 2. Turn the ignition switch to the On position. If the compass/thermometer data is not currently being displayed, momentarily depress and release the C/T push button to reach the compass/thermometer display. 3. On Electronic Vehicle Information Center (EVIC) and Compass Mini-Trip Computer (CMTC) equipped vehicles depress the Reset push button and hold the button down until "VAR = XX" appears in the display. This takes about five seconds. On Compass Temperature Module (CT) equipped vehicles depress the C/T push button and US/M push button down until "VAR = XX" appears in the display. This takes about five seconds. 4. Release the push button(s). "VAR =XX " will remain in the display. "XX" equals the current variance zone setting. 5. On Electronic Vehicle Information Center (EVIC) and Compass Mini-Trip Computer (CMTC) equipped vehicles momentarily depress and release the STEP button to step through the zone numbers, until the zone number for your geographic location appears in the display. On Compass Temperature Module (CT) equipped vehicles depress the US/M push button to step through the zone numbers, until the zone number for your geographic location appears in the display. 6. On Electronic Vehicle Information Center (EVIC) and Compass Mini-Trip Computer (CMTC) equipped vehicles momentarily depress and release the RESET push button to enter the displayed zone number into the EVIC/CMTC module memory. On Compass Temperature Module (CT) equipped vehicles depress the C/T push button to enter the displayed zone number into the electronic module memory. 7. Confirm that the correct directions are now indicated by the compass.

May 17, 2014 | 2006 Dodge Caravan

1 Answer

How to reset oil change light after oil change


Turn ignition to on position. Push and release the menu button until "SERVICE INTV. =" appears. Press and release the STEP button to select the previous service interval or enter a new one with a YES or NO option choice. The Electronic Vehicle Information Center (EVIC) exits programming mode when the C/T button is pushed or when the end of the options menu is reached.

Oct 07, 2010 | 2006 Jeep Liberty

1 Answer

2006 PT Cruiser radiator cooling fan stays on whenever the car is running. Is this normal? If not, is there a fix?


It might have a bad tempature sensor or a stuck thermostat .Faulty relays or a wiring issue I recently found a bad cooling fan plug on a 06 pt cruiser.You should first have it checked for computer codes it may show a code for the problem.

Sep 08, 2010 | 2006 Chrysler PT Cruiser

1 Answer

My horn quit honking on my 2006 chrysler pt crusier..


find the horn ,it should be at the front possibly behind the bumper ,run a wire direct to it and see it works ,if it does work then its the wiring in the steering wheel ,but as this vehicle no doubt has an air bag then entrust this job to a garage because if you get it wrong the air bag will explode ,expensive job to say the least

Jan 02, 2010 | 2006 Chrysler PT Cruiser

1 Answer

2006 pt cruiser on drivers side rear turn signal


The turn signals flash depends on each and every bulb working correctly. When one bulb fails, you will notice a change in the flash frequency, as you describe.

Replace or repair the bulb that is not working, and you should be good to go.

Doc

Sep 14, 2009 | 2006 Chrysler PT Cruiser

1 Answer

Daytime runninglights


U must remove/bypass the DRL module.

Feb 12, 2009 | 2007 Chrysler PT Cruiser Touring Hatchback

1 Answer

Fuse box


THE FUSE BOX ON 06 IS PART OF THE TIPM MODULE UNDER THE HOOD THER IS A BLACK COVER ON IT THAT SAYS POWER DIST. CENTER. THERE ARE A COUPLE OF CLIPS AND IT PULLS UP

Sep 06, 2008 | 2006 Chrysler PT Cruiser

Not finding what you are looking for?
2006 Chrysler PT Cruiser Logo

Related Topics:

445 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...