Question about 2006 Ford Mustang

4 Answers

Wrench light I have lost my manual! the wrench sign lit up on my dash today. the car is kinda dragging when i push the gas. I kinda acts like it might not want to change gears. Can you tell me what the wrench sign is?

Posted by on

  • Anonymous Mar 21, 2009

    wrench light on i took throttle sensor off what do you clean sensor and thottle body or both and with what thanks seducer

  • Anonymous Mar 27, 2014

    Wrench symbol came on after weput gas in the car. We then parked it and it went off. Not running problem

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

It may be that your TPS (Throttle Position Sensor) is bad or dirty. Try cleaning it, and if that doesn't work, then replace it. It goes for about $45, but if you take it to the stealership they'll run you over $200.
I had the same problem and got it fixed. Takes a couple of minutes.

Posted on Oct 15, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This is the "limp mode" light. The car will drag severely and if a standard, you will have rough shifts. You need to get this checked out by a dealer because your V8 engine is now running on 6 cylinders to be safe. Mine did this because of an aftermarket cold air intake without a tune. Hope this helps

Posted on Apr 01, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Ford Master
  • 1,779 Answers

The wrench light is a warning light-- 'electronic throttle control' engine has defaulted to 'limp home mode' . You should have ford dealer check it out asap. You can download a manual for your 'stang at www.fleet.ford.com/maintenance/owners_manuals/results countrycurt0

Posted on Aug 27, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 67 Answers

Maybe a Service engine type light?

Posted on Aug 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No response when I step on gas pedal


What make , model and year vehicle ? Does it have electronic throttle control (drive by wire ) ? Are there any warning lights lit on the dash ? check engine , ETC , yellow wrench symbol .

Nov 18, 2016 | Cars & Trucks

2 Answers

No communication from computer to 4wheel drive changed push button on dash still no lights on


Some vehicles have a module for the 4x4 under the passenger side dash. Most likely it is the motor on the transfer case that is bad. Year, make, and model?

Jan 25, 2015 | Cars & Trucks

1 Answer

Wrench light came on and lost all throttle truck hesitating acting like bad gas turn off fires back up and acts fine only seems to act up when driving a little aggressive


Your vehicle explained it all to you. Take the vehicle in for maintenance. Your car is cutting engine power until your problem is repaired.

Oct 20, 2013 | 2010 Ford Escape XLT

1 Answer

What does tc means


tc stands for traction control . with car started and foot on brake open glove box and push the tc button. I believe it should engage/disengage this feature but im no expert so refer to owners manual first, I think it acts kinda like a mock transfer case?

Jun 04, 2013 | 2003 Cadillac CTS

1 Answer

Got a 98 k1500 4wd changed the turn indicators on the pass side one was out and the other broke front of truck put the wrong bulbs at first and all lights flashed.. checked the number on the other side put...


There is a small fuse in the cab fuse block ,for the insterment panel that is verry easy to miss if you don,t look close ,it is hidden kind of at the top of the fuse block behind the wires,

Nov 29, 2012 | 1998 Chevrolet K1500

1 Answer

My dash lights shut off when I turn the headlights on..why?


Hi,
Looks like the light switch assembly is malfunctioning.
Most of the cars today uses plastic in the switches, plastic that acts as cams to push the metal contactor in the switch might have melted down and failed to push the contacts in the parklight mode.
Replace that switch and tell us what happened.
Hope that helps!

Dec 08, 2011 | 2009 Nissan Sentra

2 Answers

A light came on in the dashboard in the form of a wrench, what does it mean? While the light was on the car would not go any faster than 20MPH.


get it to a mechanic asap
that is a check engine light-if your vehicle is experiencing these problems while the light is on that could mean a potential breakdown that could leave you stranded

Aug 18, 2010 | 2005 Ford Five Hundred

1 Answer

Just bought my Honda accord 2007 but it did not come with book. When the wrench sign on the dashboard is lit what does that mean. It also shows oil......15% does it need oil change?


The wrench on your dash board means that maintenace is required. if your oil is at 15% it is time for an oil change and the tech that changes your oil will reset the light.

Jul 06, 2010 | 1995 Honda Accord

1 Answer

Frame and wrench light is on


Check the owners manual for maintence service intervals. ( usually done by the vehicle's milage )

Apr 08, 2010 | 2003 Chevrolet TrailBlazer

1 Answer

Have a 2002 Tribute (purchased new). Just bought gas, car idles rough...engine check light is lit (not blinking). Is this a definite sign of water in gas? Didn't use car for two days since snowstorm in our...


Not necessarily so, It may be the timing "Chain" it may also be a fuel system problem, or ignition system.

If the Check engine light is lit then I would Highly suggest checking what the issue is. Especially if the vehicle is acting in an odd way. you can get this done free at Autozone stores if the individual store offers it..

Dec 27, 2009 | 2002 Mazda Tribute

Not finding what you are looking for?
2006 Ford Mustang Logo

1,466 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...