Question about 2004 Pontiac Grand Am

1 Answer

2004 pontiac grand am gt

The service engine soon combined with the trac off light stays on.

Posted by on

  • zissors65 Aug 27, 2008

    Yes, I just bought a new used 2004 Grand AM GT and when tested drove the car both these light had been on the dealer fix the problem supposedly but the lights are back on.



    Turn the car on this morning and ABS, Service Engine Soon and ETS lights all on drove car to train station turned off engine waited five minutes turn car back on and all lights off ...should not have to have to deal with these issues.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 81 Answers

"...should not have to have to deal with these issues"

Agreed! But, there seems to be a glitch involving the ABS and TRAC system. On my 99 GAGT, when the eng and tranny are cold, I tend to get an ABS fail during turn/brake instances. If I restart the engine, it generally goes away. I've done a bit of research and have found nothing that fives a definitive answer to this. If you take it to the dealer, it will cost an arm and a leg for the troubleshooting alone. I'd recommend driving it as is provided you can get the ABS to reset by restarting the engine.
Sorry I can't provide any better solution...

Posted on Sep 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Abs light and brake light are on. also service


You can test the wheel speed sensors by unhooking the connectors and put ohmeter test leads on the sensor terminals should read around 1100-1600 ohms also the connectors themselves were bad for wires breaking inside the insulation at the connectors from flexing when the wheel is turned back and forth..Note excessive wheel bearing noise from bad bearings have also been known for interferring with clean abs signal also causing abs codes good luck

Nov 06, 2009 | 2004 Pontiac Grand Am

1 Answer

After start up, engine, trac off, abs, and service engine soon light come on. vehicle runs normal.


trac off abs light , the problem is in one of the wheel bearing, that is where the sensor is.

Jul 26, 2009 | 2000 Pontiac Grand Am GT

2 Answers

Abs light, trac light, service engine soon light 2001 Pontiac Grand Am


Sounds like you have a bad wheel speed sensor. You need to have it scanned. Since it's been sitting, it might just be a bad connection to one of the speed sensors.

Jun 01, 2009 | 2000 Pontiac Grand Am GT

1 Answer

Loses power and starts chugging


i think its your computer. but first chek your alternator

May 31, 2009 | 1999 Pontiac Grand Am GT

1 Answer

I JUST HAD THE HEAD GASKET, VALVES, AND THE HEADS DONE. NOW MY ABS-SERVICE VEHICLE SOON-AND TRAC OFF, LIGHTS ARE ON. THIS IS A 2004 PONTIAC GRAND AM GT.


These lights have nothing to with the engine work, unless they disconnected or damaged your abs sensors. it sounds like they need replaced, problem is they are integrated into the hub/bearing assembly. when you replace the hub(s) be certain not to over-torque the axle nut, as this would simply redamage the hub

Apr 23, 2009 | Pontiac Grand Am Cars & Trucks

Not finding what you are looking for?
2004 Pontiac Grand Am Logo

414 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...