At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: What type freon is in a 1996 2.2liter engine Sonama...
That is 134a equipped and it takes 24 ozs (1 1/2 lb.)plus 5 oz of Pag installed in a completely empty system, should be applied with system at 30 in of vacuum.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The freon capacity for a 2013 Toyota Highlander with a V6 engine will depend on the type of refrigerant that the vehicle uses. The base model of the 2013 Toyota Highlander typically uses either R-134a or R-1234yf refrigerant. If your vehicle uses R-134a, the freon capacity is approximately 21.7 ounces or 630 grams. If your vehicle uses R-1234yf, the freon capacity is approximately 22.5 ounces or 640 grams. It is important to use the correct type and amount of refrigerant in your vehicle's air conditioning system to ensure that it functions properly. If you are unsure which type of refrigerant your vehicle uses or how much is required, it is recommended that you consult a Toyota dealership or a professional mechanic for assistance.
oil stay in system. if you have a freon leak oil come out.for the all system 8 ounces. But 1 ounce dryer ,2 ounces compressor , 1 ounce condenser, 1 ounce evaporator and so on
Since the auto parts stores sells freon cans in 12 ounce cans and a pound is 16 ounces you will need two cans you will use one whole can and about 5 ounces out of the second can dont try to force all of the second can into it you will over charge it you could take it to a shop and let them charge it precisely out of a 30 pound can with a scale they will put exactally what is needed.no more no less and you wont have to guess how much is 5 ounces out of the second can. good luck hope this helped you.
Just start the engine and run your a/c. connect the hose (this hose is probably one you bought at the auto parts store along with your freon.) Relese the freon by screwing the object that is attached to the top of your freon can in and then out. Let the freon completely **** into system. You will know when your system is at the opporating level when your compressor stops clicking on and off and stays on. Most systems take only two 16 ounce cans of freon to be charged.
×