Question about 2006 Chevrolet HHR

1 Answer

Remote are not working -

My remote to my cars stop working all of the times I change battery , it works for a while and and it stop again. The dealer wants 150.00 jsut to look at the car and if I have to replace them it would be another 100.00

Posted by on

  • Anonymous Sep 03, 2008

    same problem with both #1 qnd #2 remote for 2003 Chevy Avalanche. I thought bad Batt. but changed to new batt. and still not working.....haven't been able to find solution as of yet. still researching.

  • Anonymous Mar 24, 2014

    Each time that I replace the battery, it only works for about one month

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 507 Answers

Could need reset to the car or just needs to be resynchronized. To resynchronize look in your manual. To be reset to car, go to a mechanic. Tell them the procedure should be listed in all data. That is a website that mechanics use to solve some problems. But not all mechanics have access to it though.....

Posted on Sep 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1996 Mercury Sable 4 door. I cannot program my key less remote. I use to be able to use it until I had to get a new battery for it. I think that's when it stopped working.


I'm not 100% on this one but 99.9% sounds like the body control module was reset. The car would have to be brought to the dealer to SYNCH the BCM & security system. Possibly just SYNCH just
the remotes to the car. Good Luck, Frank M

Feb 21, 2016 | 1996 Mercury Sable

1 Answer

My keyless entry remote stoped working after i changed the battery in my car so i changed the batterys in my remote also now


If you change the battery, and don't plug a 'memory' saver into the cigarette lighter, the result may mean that you have to take the vehicle to the dealer to have the keys and fob programmed to the computer, again.

Jan 11, 2011 | 1994 Buick LeSabre

1 Answer

CANNOT OPEN THE SOFT TOP BY REMOTE CONTROL SOME TIME OPEN SOME TIME NO IF THE PROPLEM IS ON THE REMOTE CONTROL BATTERY HOW TO CHANGE


Take it to a dealer ,i have a funny feeling the remote or the reciever isnt working and as its a 2007 model it uses encrypted software to stop general garages from haveing a play and repairing it for you

Aug 02, 2010 | 2007 BMW 525xi Sedan

1 Answer

Remote key lock stopped working after wal mart put new battery in and now my head lights stopped workin!!!


check fuse for low beam, then possibly both low beam globes. they could have blown.
the key remote may need reprograming into system try put key in ignition in on position then press remote buttons a couple of times then try if no good need to go to dealer to be programed into system again or it needs repairing/replacing.

May 31, 2009 | 1996 Chevrolet Camaro

1 Answer

Remote key fob suddenly stopped work


Check out page 57 of the manual:

http://www.motorcraftservice.com/pubs/content/~WO6FOC/~MUS~LEN/41/06focog4e.pdf

If that doesn't work, it sounds like a trip to the dealer.

May 02, 2009 | 2006 Ford Focus

1 Answer

Keylesd remote stopped working on 2001 Jaguar vnden plas


Hi! Try cleaning the battery terminals on the remote. Check also the polarity of the battery (+) or (-). If you can, clean the button contacts also using a soft cloth moistened with 70% alcohol (clean both the buttons and the circuit board). Make sure it is dry before assembly.

Jan 14, 2009 | 2001 Jaguar Vanden Plas

3 Answers

Changing a battery on a Cobra 7777 remote control


The battery in the 7777 remote is a CR2032. If upon changing the battery the remote fails to work then you should stand next to the car and hold down both remote buttons for around 10 seconds to reactivate it. The remotes LED will flicker rapidly during this process. Keep holding both buttons until the LED stops flickering then release both buttons. The LED should now be on constant, press the larger of the two buttons and the remote should now be re-synced.
Note: This procedure is not to program the remote to the alarm, but to re-synchronise it.

Aug 20, 2008 | 1999 Mazda 626

Not finding what you are looking for?
2006 Chevrolet HHR Logo

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...