Question about BMW X5 Series

Open Question

No drive x5 bmw - X5 Series BMW Cars & Trucks

Posted by on

1 Suggested Answer

  • 81 Answers

SOURCE: procedures for removing drive shaft bmw x5

no the spindle stays on the vehicle,this process is not that difficult.start by removing the wheels and 38mm nut at the end of each shaft,then reomve the bolt holding on the front lower control arm from the front sub frame,pressout the shaft through the wheel bearing,now that the end of the shaft is out use a pry bar to pop out the shaft in the oil pan,pull them out and replace, Also you must be aware that removeing the 38mm nut is difficult without a impact gun and it is also a 12 point nut as well you must force out the ends of the drive shaft with a special puller of a air chistle with a point as you are not able to push it through by hand good luck

Posted on Mar 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 bmw x5 engine shuts off somtimes while driving


Check crankshaft sensor and cam sensor,check fuel filter.

Jun 26, 2016 | 2002 BMW X5

1 Answer

How do i get my 2005 bmw x5 out of transmission failsafe program?


If you don't want to talk to a dealer then try the BMW X5 Owners club forum to see if its a common thread.

Jul 21, 2014 | 2005 BMW X5

1 Answer

Bmw x5 abnormal light engine fault light


In normal driving engine fault light abnormal light. Diagnosis diagnosis with BMW ICOM.Check exhaust pipe, air inlet pipe; check the sealing of the coking problem, is most likely to damage caused by oxygen sensor.Advised a change of oxygen sensor.

Dec 07, 2013 | BMW X5 Series Cars & Trucks

1 Answer

Which means the code of a bmw x5 2774


p2774 means Four Wheel Drive (4WD) Low Switch Circuit High

Dec 01, 2011 | 2005 BMW X5

1 Answer

I would like to ask where is the fuse of the cigarette lighter located in my 05 BMW X5 3.0i, because I think the fuse busted.


On right hand drive models it is inside the glove compartment, behind a plastic cover. Left hand drive could be the same. The fuses are labeled on the cover over them

Jan 15, 2011 | 2005 BMW X5

1 Answer

I have fault code EGS (054) 36 Gear monitoring 4, BMW X5 E53 3,0 D 2002


2003 X5 bmw the trans. fail safe program comes on when driving, I was told that the trans needs to clean out and put new sensors. Is that true it gives the code 055

Apr 09, 2010 | 2004 BMW 5 Series

1 Answer

BMW X5 Onboard computer waring inspect fuel injection


bmw 2005 55reg diesel onboard computer says fuel inject.system but starts and drives

Jul 02, 2009 | 2005 BMW X5

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Fred Sops

Level 2 Expert

271 Answers

Al Clark

Level 2 Expert

290 Answers

Doberman

Level 2 Expert

246 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...