- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
jshuffman: Believe it or not your ignition module (located behind the coil packs) could be the problem. If your cooloing fans are not working either, this is the culprit. The worst part is that it won't always show a code on the old obd 1 systems. This module controls more than you think along with the computer on this type of car. Good luck. Hope this helps. P.S. Air conditioning will quit working too.
black soot is a running rich condition it's getting to much gas not enough air .. 14-1 ratio air to gas your carb rebuild needs to be rechecked for sticking float..
Ok, you got new 02 sensors, that is good, Now check timing, vacuum hoses for leaks, check for headgasket leak with compression test, Check or change fuel filter and plug wires. If fuel injected, try using injector cleaner and you can also remove one injector at a time to make sure it is not leaking or plugged. You can also test throttle position sensor and idle position sensor with an ohmmeter to see if they are good.
Vacume leak or bad idle motor. With the car in park and running with the hood open listen for leaks moving your hand around the different hoses looking for a change in the sounds that you hear. The idel motor also makes the car idel up to 1500 RPM or so right at start-up then idel down, If it doesn;t the idel motor is likly. Check engine light is on when running? Test for codes, Follow code test charts don't skip any steps!.
×