Question about 1995 Mitsubishi Galant

2 Answers

Automatic transaxel problem (f4a23)

Hallo, I have 2000 cc galant v6 years 1995, when the engin hot enaught (abaut 10 km), when i pressed the break the transmission feel like stuck even i releasd the break.

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 422 Answers

It sounds like the rubber line on the brake caliper is collapsed on the inside which will cause the brakes not to release

Posted on Aug 26, 2008

  • steven bruce Aug 27, 2008

    yes sir, but did you change the rubber line connected to the caliper and goes to the hard brake line on the frame. this is where your braking probem is located. the brake fluid can't release causing your calipers to stick and cant release right away

  • steven bruce Aug 27, 2008

    ok sorry about that, i had trouble reading your reply. ok lets start from scratch. now its starting to sound like the torque converter lock silinoid is not disengaging witch is a part of the traction control.



Thanks for your solution, i have repaired all the brake caliper but the problem still the same. but when i epressed the break & in the same time i moved the transexell to the neutral position the stuck doesn't feel.

Posted on Aug 27, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 1996 legnum was jumping from 4th 2 3rd gear n back while accelerating,, lost all power...died n wont start again? help please.. there are no signs of any fluids leaking

Mitsubishi Legnum????
Mitsubishi Aspire
Mitsubishi MX/MF
Mitsubishi VRG
Mitsubishi VRM (Hong Kong)
9 engines offered, day 1.
and many trans,
4-speed automatic
5-speed manual
5-speed semi-automatic

Mitsubishi F4A23-2; 4 Speed
KM175, KM176, KM177 - F4A21-2 (176-5), K4A22-2 (175-5), F4A23-2 (177-8); ES Model

the truth is , you didnt post country, nor engine size.
they match engine power to transmission (load rating)
so>? forget that.. that is for later.
IT DIED< so if the engine dont START the tranny issues are moot.
so does it crank.????
if it cranks , it next needs spark got spark to all cylinders.
that is if its not the Diesel engine, IS IT??

May 04, 2014 | 1996 Mitsubishi Galant

1 Answer

Firing order on galant 2000 v6 3.0 engine and distributer

Check this for 2000 Mitsubishi Galant 3.0 liter SOHC V-6...


Remember to rating this free answer.

Sep 16, 2011 | 2000 Mitsubishi Galant

1 Answer

02 Stratus coupe. 3.0L V6. Automatic Transaxel(transmission) Engine throttles up after downshifting to first and car try to push forward through the brakes. Throrrle body is free moving and clean of...

indicates that the servo/solenoids are not being deactivated on slowing down
could be from dirty oil, tcm ot TR unit
run the fault codes forst

Oct 05, 2017 | 2002 Dodge Stratus

1 Answer

2000 Galant 3.0 V6 won't idle when warm

that weired they normaly die when the air con turnes on ummmmmmmmmmmmmm check the air filter

May 22, 2009 | 2000 Mitsubishi Galant

1 Answer

1995 Galant Idels between 1500 and 2000rpm.

hi, i would say the automatic choke spring broke, this is what controls the cars idle at cold and hot engine tempatures. if it's broke it is no longer able to automaticly regulate the rpm's the for making it idle at hi rpm. hope this could help you.

Jan 06, 2009 | 1995 Mitsubishi Mirage

2 Answers

6a13tt engine problem

I bought Mitsubishi legnum VR4 V6 2,5cc, with 87000 km milege, can you help me and tell what kind of engine oil can I use for this model/Thank you very much for help

Aug 25, 2008 | 2000 Mitsubishi Galant

1 Answer

My V6 sport galant has done 81,000 miles and has loud tappet noise when cold but still evident when hot. Always main dealer serviced.?

Your engine has internal timing belts that need to be replace. Had the same ploblem on mine. This cleared it up pretty quick.

Jul 15, 2008 | 2000 Mitsubishi Galant

2 Answers

Hyundai 2000 Grandeur

Hyundai grandeur was running fine and now simply wont start. it turns over fine but thats it?

May 28, 2008 | 2001 Hyundai XG300

Not finding what you are looking for?
1995 Mitsubishi Galant Logo

366 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8825 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides