Question about Toyota Camry

1 Answer

On our trip home the stereo system stopped working. the volume just isn't working and we cannot find where the wiring problem may be

Posted by on

  • yadayada
    yadayada May 11, 2010

    The year of the car makes a difference.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 1,586 Answers

It's unlikely that all the speakers would suffer a blowout at the same time, so most likely the problem is in the head unit (the dash unit). The head unit has an amplifier built into it, and sends the sound out through the car's wiring to each speaker. It's possible that the amplifier died, but it could also just be a fuse - if you're getting a display on the unit but no sound, then the fuse is fairly unlikely and you may well be looking at a problem with the head unit itself.

Posted on Aug 26, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Putting a new stereo in my Dodge Durango 2002 the volume on the radio is not working why

are you sure you have the speaker connection is pushed home into the rear of the radio ? if it is new and you have the wiring correct then it may well be the radio its self so take back for an refund or exchange

Mar 24, 2015 | 2002 Dodge Durango

1 Answer

Most stereo functions just stopped working.

Sounds like you have an internal short in the stereo. Or could be that the face of your stereo is worn out too. Get another radio.

Feb 12, 2018 | 2005 Dodge Durango

1 Answer

My radio volume just stopped working but you can see the channels and change from different stations what is wrong with it

If you have volume but cannot control it, this is a common problem. The volume is optical so it may just have dust in it, but I have had zero luck cleaning them. The only solution I know is to replace the whole head unit.
If you have an HK factory stereo with no volume at all, and the four channels went out one at a time, the amp in the trunk has failed. Another common problem. The amp is on the driver side above the wheel well. You have to remove the driver side rear deck speaker to get the trunk lining off without tearing it. The screws that hold in the speaker are beneath the speaker grill in the rear deck. Good luck getting a 15-year-old speaker grill up without breaking the snaps. Slide a putty knive in from the sides to try to release them, but they will break anyway.
If the amp has failed, you can just bypass the amp but you will have no subs or tweeters. I did that while looking for a good deal on a junkyard amp. You can buy a new HK amp from BMW but they are prohibitively expensive. You could buy an alternate brand amp and add crossover circuits to power the subs and tweeters if you are really handy with electronics.

If you have an HK system in your BMW and you replace the head unit, use the antenna power wire from the new stereo as the 'on' signal for your HK amp in the trunk. Your FM may not work quite as well because the BMW head unit communicates with the antenna amplifier. Also, if you have a BMW CD changer in your trunk, no other head unit will communicate with that other than the original BMW head unit.
Other than the CD changer and the antenna amplifier, the wiring adapter that you can get from Crutchfield or from Amazon will make the stereo head unit replacement plug-and-play.
You may need a special five-sided wrench to get the old stereo out. You can buy that wrench on line if you can't force some other tool into those two cap screws that hold the stereo in.

Sep 18, 2011 | 1996 BMW 3 Series

1 Answer

I bought a 2000 ford explorer when i got it, it still had the factory stereo in it. i drove the vehicle the night i got it and it ran fine. i came home and went to put my sound system in i had to cut the...

P0743....Torque Converter Clutch Circuit Electrical
P1747 Pressure Control Solenoid A Short Circuit
P1755 Intermediate Speed Sensor (ISS) Malfunction
to be totally honest i have no idea why it doesnt run right but looking at teh codes then i would hazard a guess and you wired the radio into the automatic volume increase control ,lot of vehicles have them its where the radio will increase in volume as the speed increases and i think you have connected into this wire thinking it was switchable 12v feed from ignition for the radio ,disconnect the radio completely and try that

Feb 13, 2011 | Ford Explorer Cars & Trucks

1 Answer

Subaru stereo volume does not work.

dear it is fault with music system ,you have to replace stereo.

Jan 24, 2010 | 2009 Subaru Impreza

1 Answer

When I press any button on the stereo, the screen displaya "code." Also the volume is very very low, is this just because the stereo needs to be unlocked?

The security system for the audio has been tripped. If you have the security code, you can enter it. Otherwise you will have to call a dealer and have them reset for you unless you can convince them to give it to you over the phone. You will need your VIN when you call them.
Good luck.

Sep 11, 2009 | 1990 Volvo 240

1 Answer

2002 Dodge Van towing a Rock Climbing Wall. No

I would think that the wires from the RCW (rock climbing wall) that control the running lights are wired to the interior dash lights of the van, and a fuse blew, killing the above mentioned lights. Check the fuse block for a bad fuse, probably labeled inst lights or inst lgt. Did you make the trip there in daylight, and trip home at night? The fuse for the dash lights couldn't handle the extra drain of the RCW running lights.

Mar 25, 2009 | 2003 Ford F250 Super Duty Crew Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides