Question about Nissan Quest

1 Answer

Replacement door handle

Where to find a replacement sliding door handle for a 2000 mazda mpv

Posted by on

  • Anonymous Mar 23, 2014

    how to replace rear door handle on a 2000 mazda mpv dx

  • Anonymous Mar 29, 2014

    external door

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 422 Answers

Salvage yard or dealer

Posted on Aug 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you replace mazda mpv rear door handle


remove inner panel look for hidden screws panel may have pop out clips so pull at panel gently should be 2 10 mm nuts that hold it in pop up clip pull out handle rod etc.

Feb 15, 2015 | Mazda MPV Cars & Trucks

1 Answer

How to remove sliding door panel mpv 2000


there are few plastic tabs behind the panel. you will need to pop them using a flat spatula or screwdriver then you need to remove the retainer ring by the handle using a sharp pointed metal object to push the retainer out. this process is a little tricky.

Aug 19, 2014 | 2000 Mazda MPV

1 Answer

The inside door handle no longer opens the door. I must wind down the window and use the outside handle.


MOST LIKELY THE INSIDE DOOR HANDLE BROKE. YOU MUST REMOVE DOOR PANEL AND INSPECT HANDLE AND ALL RODS THAT OPERATE THE LATCH. GOOD LUCK MOTOR62500.

Dec 20, 2010 | 2000 Mazda MPV

1 Answer

How do you change the exterior door handle on a 2000 Mazda MPV?


You have to remove inner door panel, once off carefully remove plastic to gain access to door handle, disconnect wire rod from handle unbolt handle and remove. installation in reverse

Aug 20, 2010 | 2000 Mazda MPV

1 Answer

My back doors do not open from the outside(only the inside) it is a 97 mazda mpv. Child safety feature has been disabled. Replaced door latch. Still does not work.


It is probably due to bent rods that attach to the handle and run to the latching mechanism inside the door panel. If you remove the door panel with the window up you should be able to reach in and straighten the rods.This was a recurring problem on mine.

Mar 04, 2010 | 1998 Mazda MPV

1 Answer

How do I replace an outside door handle? Do you need a special tool to take off the inside panel to get at the handle?


There is a special tool to remove the door panel, but you can get by with a screwdriver, first you will have to remove all of the screws you see in the panel, armrest,and door handle areas,then slide a flat blade screwdriver between the door and panel and gently pry until fasteners pop out of door.Do this on bottom and sides then lift upward on panel and remove and disconnect wiring.You should be able to see the two nuts that hold the handle on.Usually a 10mm socket to remove it.

Oct 26, 2009 | 2000 Mazda MPV

1 Answer

Drivers side window has slipped off track 2006 mazda mpv


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you can readjust the window mechanics.

Sep 29, 2009 | 2006 Mazda MPV

1 Answer

How to remove the door screen on 2000 MPV


It appears he tells you to remove the door panel, but doesn't actually explain the process...
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.

Sep 22, 2009 | 2004 Mazda MPV

1 Answer

How do fix drver side rear sliding door window


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Pull back the weather seal and you'll see the innards of the door

Sep 21, 2009 | 2000 Mazda MPV

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...