Question about Mitsubishi Lancer Evolution

3 Answers

Cow boy alarm fitter came to fit alarm.When came to pick car up cenral locking did not work. he didnt no what he had done. So i had my car back with out paying 3 days later . I have now taken alarm of checked all fuses,liveto central locking module,pluse earth.but wont work of door lock or standerd key me please nick.

Posted by on


3 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Did u get problem sorted I have same problem only I'm the cowboy

Posted on May 04, 2015


Above solution were posted by

Posted on Sep 11, 2008


Try to check wires to the driverside central lock master motor. alarm installer probaly cut wires inorder to link the alarm to your cars central locking system.

Central lock master motor usually comes with 5 wires, two is the motor supply wire capable of reversing its polarity depending on lock or unlock request, the remaining 3 is just a swtich. One is ground and the two are negative request swtich for lock and unlock. If all fuses were good this moght be the problem, try also to check the outside fuses- in the hood. Good luck!

Posted on Sep 11, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Is a 2001 hrv pre-drilled for towbar fitting? Also is there a fitting guide available?

if you want to fit the tow bar your self you should be aware that by fitting a tow bar it is a modification to the vehicle and requires a certified plate attached to the vehicle to cover insurance requirements and road worthy inspections
next most purpose built tow bars sold by auto shops will pick up existing holes in the sub frame mand you can get a harness that piggy backs onto lights on one side for the trailer
Best talk with a tow bar retailer/ fitter as they can certify the bar and the fitment and have a harness in stock

Sep 15, 2016 | Honda HRV Cars & Trucks

1 Answer

Have a bmw z3 2.2l 2001. fitted alarm, since then speedo not working, fuel gauge goes to full when ignition turned on, brake warning light and airbag warning light on. Steps already taken, removed...

another case of boy racer alarm problems ,this vehicle is fitted with a factory immobilisor ,if i wanted to steal this car the alarm wouldnt stop me i would just lift vehicle up with a flatbed breakdown truck and no one would even look twice .best deterrent is a krooklock on the steering wheel and keep the key seperate from the ignition key,most vehicles are stolen with a house break in for the key ,criminals are smart and know they cannot get past the immobilisor .also keep a spare krooklock key in the vehicle and do not tell anyone

Mar 11, 2010 | BMW Z3 Cars & Trucks

1 Answer

Daimler 93 4.0 auto :alarm:windows go up a little then stop when alarm is pressed: when lock with key window go all way up why?

This is not original jaguar ,this is a boy racer add on alarm fitted .Cut it out and throw it away or it fail on you one day and car will not start in the middle of nowhere

Jul 11, 2009 | 1993 Jaguar XJ6

1 Answer

Ignition stuck in lock position

First, lubricate the key cylinder by spraying wd-40 into it -- this usually frees it.

You can also move the steering wheel back and forth while wiggling the key -- sometimes the steering wheel lock binds the key cylinder.

If this works, you can follow up the wd-40 lubrication with graphite lock lubricant (Pep Boys).

If lubrication doesn't work, let me know, we'll go to the next step.

Apr 23, 2009 | 1992 Toyota Pickup

1 Answer


Mine has done this and i as well do not have a working remote. To disengage it just put the key in the driver door lock and turn for 2-3 seconds and it will disengage. i didn't even know mine had an alarm until coming out of work one night and it went off and i could not get it to turn off unless i went to "unlock" the door and hold it there for a few seconds.

Apr 14, 2009 | 1999 Dodge Durango

1 Answer

Centrul locking not working on a ford escort 1999

cut out the boy racer alarm ,thats easy or just cut the power supply

Jan 03, 2009 | 1998 Ford Escort

1 Answer

Door locks lock and unlock permanently

had this before but with a variety of faults ..boy racer alarm .take it off and invest in a decent steering wheel cover/lock ,fault in lock itself on drivers side as its used the most till i done one with the passenger side lock ,now that throw me .try throwing the boy racer sunday driver alarm away

Oct 12, 2008 | 1992 Ford Escort 4 Door

2 Answers

How to disarm a factory alarm without the keyfab

Have the door panel removed. On the back of the lock cylinder(should be but it maybe loose)harness. manipulate the harness to disarm the factory alarm. Car should start.

Jun 15, 2008 | 1995 Chrysler Cirrus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

324 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

77514 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides