Question about 2000 Chevrolet Blazer

2 Answers

2000 chevrolet blazer

My truck just stopped going into reverse yesterday, could i need to replace the reverse motor. the truck was working fine all day going into reverse then yesterday evening it wouldn't reverse

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert whose answer got voted for 20 times.

  • Expert
  • 158 Answers

If it still goes forward but had what seems like a delayed shift at around 25-30 mph, it needs a reaction shells. This break/ strip out all the time.

Sometimes I do 4 a month!

Posted on Apr 02, 2009

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

There is no reverse motor, more than likely its a transmission issue and if you know how then id check it out but if not then i would suggest finding a repair shop.

Posted on Sep 02, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I have a 1997 chevy blazer. the reverse isn't working the forward gears work just fine. do I need a different transmission?

Does it have a automatic or manuel trans? You said gears, manuel trans, possible shift fork, syncro, anyway you will need
some serious work done to it....rebuild it or replace it.....

Feb 28, 2015 | 1997 Chevrolet Blazer

1 Answer

My blazer will not go in reverse all of the other gears work fine what could be

transmission about to go out get it rebuilt bands inside transmission gone get it fixed before you get stuck .

Jan 13, 2013 | 1998 Chevrolet Blazer

1 Answer

2000 Blazer. Trans will not shift to 3rd or 4th. Speedometer only works after 3 or 4 miles of driving (in 2nd gear). Fluid full, red, fresh. Reverse fine. Check engine light. Briefly worked yesterday...

, places like autozone do free diagnostics scan , if not shifting may have a m.i.l. code also could be speed sensor. try the autozone scan first to get code . they will scan for free, just tell them your problem ! good-day !

Sep 21, 2011 | 2000 Chevrolet Blazer

1 Answer

On my 2000 chevy blazer the gear wont go to park from reverse,its gets stuck or i have alot of trouble getting the gear to go to park postion

This is just a guess,but it could be your Transmission Range Sensor. It may need adjusted or completely replaced.

Oct 19, 2010 | 2000 Chevrolet Blazer

2 Answers

My 1996 blazer a/c system works fine....... But the blower every now and then 10 - 15 mins. Stops blowing for about 1 - 2 seconds and comes right back on. Resistor?

Very unlikely, most likely the motor is overheating and locking up. The resistor will either work or will not work. All it does is vary the voltage to the blower not shut it off.

Jun 30, 2010 | 1996 Chevrolet Blazer

1 Answer

2000s10 blazer 4wd light blinks then goes back to 2wd can hear encoder motor making noise trying to engage never will go into 4wd

my 87 blazer has a vacum-mudual that screw's into tranny,i replaced it do to a rusty ball inside that keped on sticking,works fine now, not shure how your's ingages but maybe its the same,your's may be to new tho,call an auto store and ask if you have a vacum-mudual on yours,good luck

Dec 20, 2009 | 2000 Chevrolet Blazer

1 Answer

2000 chevy Blazer Emergency brake stuck on. Was

Sounds like a likely possibility, the reverse method definetly did the trick in loosening the brake, but it may still be slightly applied, put it in a warm place when you can, or have a shop look at it indoors, it may need to be re-adjusted, or even just warmed up until the cable frees up again

Dec 11, 2009 | 2000 Chevrolet Blazer

1 Answer

Intermittent interior fan on blazer 2000.

blower control modular,,are u engaging while moving or stopped.

Dec 08, 2009 | 2000 Chevrolet Blazer

2 Answers

2000 chevy blazer will not go into reverse, but all other gears work fine.

sounds like reverse let go you need to have trany rebuilt. soory for the bad news, good luck.

Nov 29, 2009 | 2000 Chevrolet Blazer

3 Answers


1)Pull the wire of the switch and hot wire it or go to a junk yard and get another switch,or 2) pull the fuse on and off to see if it my come o

Jan 23, 2009 | 2000 Chevrolet Blazer

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

74311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7244 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides