- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello! since I do not know which engine is in your Fusion I'm sending you a diagram of both; 2.3L (4 cyl.) and th3 3.0L (6 cyl.)....The compressor is encircled in both diagrams...If there is a correct amount of refrigerant the clutch (front of compressor) will engage....Guru....Saailer
Although the 4 cylinder is too underpowered to have air conditioning in my opinion, it still shouldn't overheat within 10 minutes unless something is wrong. If your Jeep doesn' not overheat when you are driving WITHOUT AC on then your compressor might have a problem and causing the engine to work too hard to turn it.
But if it overheats without the AC on, then the first thing you need to do is check the cooling fan and see if it operates! There has been a lot of problems with the cooling fan relay on this model. If that isn't it, then move to changing the thermostat and checking the water pump.
clearly - this is a shifting solenoid in your transmission. Either the power leading to the solenoid is not functioning properly or the solenoid needs replacing. there's a slim chance that the transmission fluid is low or otherwise shot... as always check the easiest/ most inexpensive fix first. Best regards Ck
I have a 2000 Passat (1.8T), and I recently had this code (P0411). First thing I did was to clean the mass airflow sensor (MAF) and reset the code by disconnecting the battery. Unfortunately, the code came back. It also came back with P1426. It ended up being the purge valve ($60 at ECSTuning, $140 at the dealer...I went with ECSTuning). Before you drop money on the part, inspect all of the hoses to ensure they are not cracked or torn.