Question about 2003 BMW 325

1 Answer

2003, 330Ci radio, navi buttons on the dash not functioning.

For some reason, all buttons for the navi, radio console is not responding.
Monitor has power/light, only navi warning message shows. However, the radio buttons/control on the steering is working.

Posted by on

  • jmcash21 Sep 03, 2008

    I have the same problem with my 05 M3 convertible! My navigation screen and radio is on with the ability to change stations from the steering wheel. However, the buttons on the radio do not respond, I can't even turn it off. Nor does the motorized front open to eject the CD. I have not found a solution yet, let me know if you find one...thanks!

  • ssfnative Jan 02, 2009

    Thank you John: this is helpful in a way to identify the problem point.

    I ended up replacing the comm module ($1,400) and later found that module should be compatible with navi monitor ($3,400).

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

Hello . ok first try disconecting the nave unit on the trunk if the radio comes up and the buttons work you have a bad nave unit (very common ) . other option look for radio fuse in glove box top open white tabs on top diconect the fuse and reconnect to see if it will restart the radio pannel if not replace the radio pannel .

Posted on Nov 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you enter a radio code with a "9"


you do not have a number 9 in the radio code. the radio code was on a small white sticker and there was 3 copies of it when the auto was shipped to the dealer. If you have a navi system in the car that may be the navi code that you are looking at. If you cannot find your radio code you will have to contact your dealer and he will want the serial # for the radio. Turn the radio off and press and hold the #1 and 6 buttons. Now press the power button. You have entered the self diagnosis of the radio. press the #2 button and it will give you the serial #. Press it again and you can temp. listen to your radio. The radio will fail after 3 attempts. Pull the neg. cable off the battery and start over.

Jul 31, 2009 | 2004 Honda Odyssey

2 Answers

Radio code for 2002 Acura RL


you need the serial number from the radio unit and the navi system (not the screen). If you are the origal owner, that was given to you with the books. the radio code is a 5 digit number and the navi code is a 4 digit number.they may have put a sticker with a 5 digit number on the inside walls of the glove box. if there is a sticker with more that 5 numbers, call you dealer with that number, that may be your serial number. the navi system has 4 digit code

Mar 28, 2009 | 2002 Acura 3.5RL

3 Answers

Center Console Display Not Working


Changed the battery yesturday in my Mazda rx-8. Now my radio/CD and my A/C won't work! It's all black! Wot to do???

Jan 28, 2009 | 2004 Mazda RX-8

2 Answers

Turn signal


The wire under the hazard button has probably come loose. Most GMC vehicles this year range were made with a closed circuit wiring between the flashers, hazard lights, and rear defrost. Over time the wiring under the hazard button has been known to loosen. This causes the whole system to lose function. If pop out the hazard button on you center console you should be able to tighten that wire back on and the system should work again.
The same thing happened to me when I put in a new radio. I bumped the wires off and my blinkers, rear defrost, and hazard lights went out. I replaced the fuses and the flasher relay but nothing. Then I asked a mechanic and he told me what I just told you.
Hope it helps!

Nov 04, 2008 | 1997 Geo Prizm

1 Answer

SETTING THE CLOCK


The analog clock has little buttons on the face to move the time forward or back. If your FX has NAVI hit the setting button then choose CLOCK. If it doesn't have NAVI hit the menu button and scroll down to the clock setting.

Oct 16, 2008 | 2007 Infiniti FX35

2 Answers

520i 2001 business radio and cd with monitor not functioning


Hi geox43,

I think that you'll have to visit your BMW dealer and ask them to scan and recode the anti theft unit..

Regards Johngee10

Sep 10, 2008 | 2001 BMW 5 Series

Not finding what you are looking for?
2003 BMW 325 Logo

Related Topics:

371 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Fred Sops

Level 2 Expert

271 Answers

Al Clark

Level 2 Expert

290 Answers

Doberman

Level 2 Expert

246 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...