Question about 1993 Volkswagen Jetta

1 Answer

NO BLINKERS WHEN I PUT ON THE BRAKES

WHEN I STEP ON MY BRAKES MY BLINKERS DON'T WORK BUT THEY WORK WHEN I DON'T PUT ON MY BRAKES

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

Check to see if you have a burnt out light bulb, that usually causes your blinkers to stop working when you apply the brakes. and check your four way flasher fuse, it's part of your turn signals and brake lighting system.

Posted on Jan 01, 2009

2 Suggested Answers

  • 42 Answers

SOURCE: Blinkers,hazzard lights,tail and brake lights

It does sound as though the trailer connection is the source of the problem, check to see if the wiring has been resting on the exhaust pipe and melted through, shorting the wires. Also check if it is squashed or damaged anywhere. Failing this you may have to pull the trailer connector apart and see if the wires have come out inside and are touching, this can happen if the trailer connector is pulled hard.

Posted on Mar 24, 2011

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my left side blinker light up when i put my brakes on


I have a vz commodore the blinker works properly untill i brake and also when going straight ahead i break and my blinker light comes on AmanStino QUICK CHARGER 3 0 USB charger Multi Port Intelligent USB Wall...

Nov 30, 2016 | Cars & Trucks

1 Answer

BLINKERS DON`T WORK


I had to take car apart to put in a heater core and after i put it back together I noticed no blinkers and found out that the wires for the emergency lights were loose, if those wires arent hooked up u will have no blinkers

Apr 04, 2014 | 2004 Chevrolet Impala

2 Answers

Dodge Caravan break lights in back don`t work


do they work if you put on the head lights. ? do they work when you step on the brake pedal?

Jan 04, 2013 | 1999 Dodge Caravan

2 Answers

2005 Ford Focus- Blinkers, Brake lights and hazards don't work -just change the bulbs and they still don't work. Help!


That should be on two different fuses, but everything goes thru the turn signal switch.
The switch might be faulty. A mechanic would check for voltage there.

Jul 11, 2012 | Ford Focus Cars & Trucks

1 Answer

I have replaced all my blinker light bulbs and allthe fuses. Put in new flasher fuses and pulled blinker arm and replaced with kit. And the break lights and and blinkers still don't work


on the brake lights, check to be sure the switch located at the top of the brake pedal isn't stuck, you can Jumper the switch to see if that works,

Jul 22, 2011 | Dodge 400 Cars & Trucks

1 Answer

Blinkers,hazzard lights,tail and brake lights ,dash lights ,i put foot on brake and you can see the left blinker light flash on when I step on brake but the fuse is already blown ,and it seems when I use...


It does sound as though the trailer connection is the source of the problem, check to see if the wiring has been resting on the exhaust pipe and melted through, shorting the wires. Also check if it is squashed or damaged anywhere. Failing this you may have to pull the trailer connector apart and see if the wires have come out inside and are touching, this can happen if the trailer connector is pulled hard.

Mar 24, 2011 | 2008 Jeep Liberty

1 Answer

I have a 2004 Ford Expedition 4.6L XLT. My brake lights do not work when I push on the pedal. My top brake light doesn't light up at all. The lights for the other two light up when I turn on my lights,...


I am having a simliar problem! Mine is when I put the blinker on and apply the brake my blinkers don't work & then when I put my right blinker on my left and right one blink @ the same time!

Jan 13, 2011 | 2004 Ford Expedition

1 Answer

Brake lights do not work. step on brake in park brake lights work. turn right signal on and step on brake left brake light comes on . turn on right signal and no brake lights work. put transmission in...


One of 2 things to have checked, if all your bulbs and connections are correct. 1-stop lamp switch module.
2-multifunction/combination switch (blinker arm/components that are in the steering column). For about a 1/2 hrs. labor cost, a mechanic should be able to test the circuits.

Apr 28, 2010 | 1997 Oldsmobile Cutlass

Not finding what you are looking for?
1993 Volkswagen Jetta Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

yadayada
yadayada

Level 3 Expert

66433 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...