Question about 2003 Ford F250 Super Duty Crew Cab

3 Answers

Blinker fluid where is the reservoir for the blinker fluid at on a ford pickup at?

Posted by on


3 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

What that don't even make any sense at all and some lol kids are prolly pranking you so dont fall for it

Posted on Jan 03, 2015

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 169 Answers

Some one is pulling a prank on you. In the auto industry we use that joke on newbie techs and parts guys? Sorry for the joke?

Posted on Aug 25, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 674 Answers

Stop at napa and pick some up and i will come over and install it for you (you will also need a little vaseline )

Posted on Aug 25, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Can you show me pi cure of clutch fluid reservoir and its location on 1998 ford escort

if you don't see any clutch fluid reservoir for the clutch, there are two possibilities: clutch master shares fluid reservoir with the brakes or clutch is using cable not hydraulic.

Mar 21, 2016 | Ford Cars & Trucks

2 Answers

How do you change power steering fluid on 1994 toyota pickup DLX with 4 cyl. engine

Should have done it when you had everything unhooked.

Rather than disconnect the hoses I use the trigger unit from a plastic spray bottle to pump the fluid out of the PS reservoir. Just unscrew the spray tip on the trigger unit, drop the tube section into the PS reservoir and pump out the old fluid into a container using the trigger. (If the plastic tube has a tiny filter on the end just cut it off before you insert it.) Then refill the reservoir and take the car for a short drive to circulate the new fluid. Then do it again. Empty and refill.

In a few days or a week, repeat the process (2 more empty and refills)and you will end up with nice new fluid in the system. If you like do it a 5th time in a week or so (1 more empty and fill) but at that stage you should find you are pumping pretty clean fluid out.

Not the most efficient system but it is very easy to do, takes little time and you do not need to go disconnecting pump lines which I would rather no do..
I do it this way on all my own cars every few years because it is easy, clean and works well and keeping the fluid clean and fresh means less wear on the pump due to contaminants and fluid deterioration.

If you get air in the system because you run the fluid level below where the lines fit to the reservoir don't worry. The air will be removed when you drive the car and turn the steering wheel back and forth. I don't run the fluid below the line connection when I remove old fluid from the reservoir.

Feb 28, 2015 | 1994 Toyota Pickup

1 Answer

Bottom blinker light not working

either the blinker fluid is low or the bulb is loss or burned out. could be a fuse thats bad

Jul 29, 2014 | 2010 Dodge Ram Pickup 1500

2 Answers

Brake light has turned on

Have you checked the fluid level in the master cylinder reservoir.. There is a float in there that is connected electronically to let you know when the fluid is low.

Jan 27, 2014 | 1986 Toyota Pickup 4WD

1 Answer

Pickup leaks ps fluid from the reservoir changed ps pump and cap still leaking any ideas

Check valves on steering box. What is happening is that the pump is returning more fluid to the reservoir than what it is using to move the box.

Apr 06, 2013 | 1992 Toyota Pickup

1 Answer

ABS light and parking brake light stays on 1997 nissan hardbody pickup

Check the brake fluid level in the master cylinder reservoir.
Low brake fluid level can cause both lights to come on and stay on

Dec 11, 2012 | 1997 Nissan Pickup

1 Answer

1991 f-150 ford pickup truck power steering pump

Purchase a replacement pump at Autozone or Kragens. Remove and plug the two pressure lines. Loosen the adjustment braket. Pull the pump over to loosen the belt. Remove the belt. Remove the adjustment bracket. Remove the bolt holding the pump. Replace the pump. Put on the belt and tighten it until there is 3/8 in. flex. Refill the pump reservoir with power steering fluid.

Mar 11, 2011 | 1991 Ford F150

1 Answer

How do you drain the clutch fluid reservoir on a 1988 Ford F150 pickup?

You don't, per se, drain it. First, locate the air bleeder screw on the slave cylinder and crack it loose, then snug it back down just enough to not leak.

Then, with a helper, bleed the old fluid out and add new fluid as the level in the master cylinder goes down.

When you have clean fluid coming thru the bleeder screw, make sure there isn't any air in the system and tighten the bleeder screw.

Make sure, as you perform the bleeding process to not let the cylinder run out of fluid.

Jan 16, 2011 | 1988 Ford F 150

1 Answer

My blinker is messing up on the passeger side

you probably need to re pressurize your blinker fluid reservoir.

Dec 18, 2009 | 2000 Buick Regal

1 Answer

My right rear blinker light will not work on my 2006 Ford F-150 pickup. I have changed the bulb and looked for loose connections. The break light,tail light and front blinker all work. Where do I look?

Add blinker fluid.. Just kidding.
examine the socket and make sure there is no debris in it or damge to it that could cause the connection to not be made. You could have just gotten a bad bulb to replace it with also.

Sep 28, 2009 | 2006 Ford F-150

Not finding what you are looking for?
2003 Ford F250 Super Duty Crew Cab Logo

Related Topics:

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

5626 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides