Question about 2000 Chevrolet Suburban

1 Answer

2000 Suburban turning, backing issues

I have owned this vehicle for 9 months with no problems. Yesterday when I tried to do a "u-ie", it was acting very strange, as if the emergency break was on. It continues to behave this way any any short of sharp turn. It feels like a resistance, hesitance or grinding. I cannot see anything obvious under the vehicle like in the wheel wells. The emergency brake isnt on.
Power Steering fluid ????

Thanks !!

Kelly

Posted by on

  • kellyskids Aug 27, 2008

    Tried the fluid. Seemed to help for one day, but still doing it. Will try to get to a mechanic this weekend. Thanks.



    Any more suggestions anyone , I am on a ZERO budget right now :)

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 876 Answers

You need to check the power steering fluid, the alignment. Take it into a small service shop and let them put it up on the rack and check all the fluids and align the front end, and see if they can get a clear idea of what is going on. You need to know that the vehicle is safe .


Thank you for using fixya. Your rating is always appreciated.

Posted on Aug 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1993 Chevrolet Suburban The engine (new) has been dragging (at times) when starting for a month or so. Now it will not turn over at all, nothing. The battery is good however it only reads 9 volts...


its a possibility that the alternator is shoot, and you do not have the power to turn engine over to start it. if battery is ok ! then get vehicle started. all accessories off,with it running you should have at least 14.2-14.7 voltage at battery. if you do not have a way to check this. auto-zone will check for free, as well as advanced auto.if all is ok, and the voltage running is less the 14 volts. replace alternator. good-day !

Sep 25, 2011 | 1993 Chevrolet Suburban

3 Answers

A friend of mine ownes a 1999 Chev Suburban K3500,


Sounds like an oil pump issue after all you describe already testing and replacing.

Dec 03, 2009 | 1999 Chevrolet Suburban

1 Answer

2005 suburban stabilatrac disabled


The Reduce Engine Power problem on my 03 Suburban went away when I had to replace the fuel mixing sensor. I damaged the sensor by topping off with E85 (ethanol) by mistake late at night. The vehicle just would not turn on in the morning. The vehicle had to be towed to the dealer. I was in Carlsbad NM about 800 miles from home. I had no choice but to pay $1,100 to get it fixed. At the same time the Reduce Engine Power problem went away. And thanks to God it has not come back for nine 9 months now.

Aug 12, 2009 | 2003 Chevrolet Suburban 1500

1 Answer

2000 Gmc Savana. Passlock problem.


Sounds like system does not recognize the key. Have system scanned to be sure as this could also be a intermittent starter issue.Most pass-lock systems can learn up to 10 keys,( try another key if you have one). Hope this helps!

Jan 26, 2009 | 1998 GMC Savana

1 Answer

1997 Suburban


Well it sounds like you have a short circuit somewhere. it apperars to be messing with the relay that you replaced. have you checked all the fuses in your fuse-box? how about all the bulbs on the exterior of the vehicle? try those things then post back.

Jan 06, 2009 | 1997 Chevrolet Suburban

1 Answer

Headlight alignment


I ran into this same issue about 2 months ago. Had to replace the bulb and for the life of me I could not get it back in right. Kept aimed very high and hitting the hood. Had to go in and pay the dealer to fix and aim it. This is the first vehicle I have ever owned where I have been unable to change my own lightbulbs.

Jul 12, 2008 | 2000 Chevrolet Blazer

1 Answer

1997 pontiac bonneville lock up converter


if you converter is blocked up or clogged take it to s hop and have them cut it off and put in a new one...... with a clogged doncverter it will act like it is the transmision when it is not.... i just went through this with my suburban

Jul 05, 2008 | 2000 Pontiac Bonneville

Not finding what you are looking for?
2000 Chevrolet Suburban Logo

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

68970 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...