Question about 2002 Mitsubishi Lancer

1 Answer

1992 4g93t cd5a Mitsubishi Lancer GSR 1.8 Manual Dohc turbo starting/electrical problems

  1. Hello, thank you for your reply, my car is running on a stand alone Microtech LTX-8 Ecu, but also now my 'check engine light/service engine light does not come on at all when ignition key is turned on. I had taken the aftermarket Autometer Tacho & boost gauges out thinking I was going to sell the vehicle but have decided to keep it, I had taped up the loose wires but when going to reinstall them I had forgotten which wire goes where :) I've found the every connection apart from the 12v light switch wire..but i'm stumped on why check light does not come on. Thanking you in advance and appreciate your advice and time.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

First you need to check all your fuses with a test light. The 12 volt light switch wire for the ilumimation of your gauges is just a park light feed, the best way to find it is using test light,it can be found in radio plug or park light switch or fuse board.Your check engine light is not so easy ,first I would check the bulb in dash, then you need to make sure of you lose wire tap connections the check engine light needs a feed to it to come on you need to check your aftermarket ecu wiring diagram to see where this is or get hold of a factory one to find it to see if you can manual trip it with test light.

Posted on Aug 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to test the coil of a honda luxline 1996


this is covered in the FSM. factory service manual.
disconnect coil
there are 2 tests, ohm meter, and hot wiring.
no exact numbers as USA dont have luxlines.... nor that 1.5L , nor your smogless controls. on

D15Z4 engine.

1: check primary, it will be like (taught i school works on all gas cars)
the primary, is near 0.5 ohms. (varies by if IGN is low,med, or HEI energy levels, im clueless to luxlines.)
our 96 civic (USA) is 1/2 ohm primary.
and secondary is 22k to 33,000 ohms....
2: there is a live test. using a 12vdc battery, ill skip that is you will get shocked.. but is covered in school, the trick is to avoid infinite dwell.
if this DIZZY is a stand alone dizzy( how many pins are on the primary wiring connector?)
if stand alone it has what is called a VR pickup and an ignitor inside
you set the VR gap to spec, and the pick up amp, works, and fires
the egnitor, the ignitor is just a large transistor. it turns on, charges
the coil for "dwell spec" and the turns off, this turning off creates.
near 20,000 volts in the coils secondary.

if this is a ECU controlled spark system that is a whole other matter
if engine has a CMP and CKP sensor it is THAT system
and the ECU will tell you when they are bad, (blinking CEL lamp)

Feb 01, 2014 | 1996 Honda Civic

2 Answers

Check engine light on but car runs good




The check engine light comes ON when the cars computer (the ECU) notices any kind of electrical problem in car. In this case I suggest you to get your car scanned at autozone service center. It's absolutely free. In scanning the error codes will be retrieved.As per the error code you can check which part is faulty and replace that particular part. This will solve the problem.---------- This will help. Thanks. Helpmech.


Mar 01, 2011 | 2000 Toyota Corolla

1 Answer

I need an ecu for my honda accord 2005 2.4 i-vtec k24a4 engine.my ecu number is 37820-raf-u54.My question is what are the similar honda accord ecu that match to my car.thanks


Welcome to fixya

Hello


I have a solution for this


Press Ok, Accept or replay so we may get started


Your pre-solution is coming up shortly


PLEASE REPLY OR LEAVE COMMENT TO CONFIRM YOU RECEIVED THIS EMAIL


My name is Bruce

Jan 17, 2011 | 2005 Honda Accord

1 Answer

Just got tune up/major service on the 2001 expedition and was running great 2 days ago. Now it seems to be sputtering and the check engine light came on. It seems like it is having a fuel issue. I just...


5.4L or 4.6L engine?? Check your coils. Go to autozone or advance auto parts and have them scan the ECU for the check engine light!! Its recommended to replace all 8 COPs(ignition coil over plugs) upon replacing the sparkplugs. These typically go out, especially if the coil boots are cracked. Hopefully this helps

Jul 19, 2009 | 2001 Ford Expedition

1 Answer

Check engine light after A/T to manual swapping


if it runs leave well alone,best advice i can give as the more lights that work the more the you will worry and pay for an expensive computer diagnostic

Nov 10, 2008 | 2002 Toyota ECHO

2 Answers

Mitsubishi Evolution 8 engine management light


why does my evo 8 cut out after hard acceleration
if left on idle it is ok but after `few mins starts to almost die then picks up to 1500rpm and then back to normal

Oct 26, 2008 | 2004 Mitsubishi Lancer Evolution

1 Answer

92 Lancer 4wd turbo,4g93-t, cd5a, start trouble shoot


ok if its stand alone it depends what model you have but it may not have a cold start function

Jul 01, 2008 | 2002 Mitsubishi Lancer

2 Answers

1992 Mitsubishi Lancer GSR, 4wd 1.8 dohc turbo, cd5a, 4g93-t engine.


first thing to do is remove spark plugs and if they smell really fuely you will need to change them if that doesnt help you will need to get the microtech tuned for a good coldstart , this depends on if its running stand alone or as a piggy back
cheers.
please leave feedback.

Jun 30, 2008 | 2002 Mitsubishi Lancer

Not finding what you are looking for?
2002 Mitsubishi Lancer Logo

1,666 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...