Question about 1996 Dodge Intrepid

2 Answers

Car turns over but won't star - 1996 Dodge Intrepid

Posted by on

  • 1 more comment 
  • Anonymous Oct 10, 2008


  • joeys62babyg Oct 23, 2008

    my car overheated and did not add coolant till car completely cooled off. When I tried to start it it backfired 2 times once from the breather area and once from between the motor and firewall. It will turn over but will not start. My brother n law looked at it and says it is not getting fire. as far as compression not sure about that one and no matter how much you pump it you do not smell fuel. have been told of a ceramic sensor that has been know to break when overheated and also thought about coil packs

  • heckdog Oct 30, 2008

    just won't start..

    did this before but after a couple of days it started

    but now it won't



2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Died out on me .. I'm thinking it's the fuel filter !!!

Posted on Oct 31, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Dodge Master
  • 6,674 Answers

Start with main 3 components that need to be present to run. Fuel, Spark, compression. What have you tried so far?

Posted on Aug 24, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 1998 mercury sable wont star what can be wrong.

several things can be wrong. does it have fuel pressure does it have spark at the plugs. what condition is the battery. you don`t say what type of problem your having, like will the engine not turn over, it does turn over but won`t start up, it starts up then dies right away. your very vague as to what your after with minimum info supplied.

Oct 11, 2014 | Cars & Trucks

1 Answer

Won t start after dead battery

Check all your fuses, you may have accidentally blown one or more that would cause your problem.

Dec 22, 2013 | Toyota Pickup Cars & Trucks

1 Answer

Mazda 3 2005 won shift from park and won star either I have to put in neutral to b able to star car?

If it won't shift from park my first question would be how do you get it Into neutral? Sounds like you may have a gear selector sensor issue .

Oct 14, 2013 | 1997 Mazda MPV

1 Answer

F150 turn chiped key, but engine won't start jumped star and it starts

Hi Trinity, If the vehicle starts with a jump, the security equipment is working correctly. Have the battery and charging system checked. Regards John

Apr 21, 2013 | Ford Cars & Trucks

1 Answer

Same time don't won't star 1995 ford explored

You either know how to check that out or you
need a repair shop

No one can tell you what is wrong,only testing
will do that

Worn out Starter Solenoid
Cables Loose
Battery Failing

You gave us nothing to go by,you
realize that

Sep 12, 2012 | 1995 Ford Explorer

1 Answer

2001 f350 won't star unless pluged in

Sounds like it's the controller for the glow plugs, also, if the first glow plug in line from the controller is bad it will effect all the others. I've had this same sitituation, mine turned out to be the controller.

Jun 10, 2012 | 1993 Ford F350

1 Answer

My del star ds 700 net book won't turn on

i guess it has virus or its battery aint working go get it checked

Jan 27, 2012 | Cars & Trucks

1 Answer

Car won,t start sometimes & check engine light comes on sometimes had computer codes read said problems with TPS,airflow meter, throttle position sensor

before changing any more parts there are grounds on the engine that need cleaned one on the back of intake manifold then you have to remove battery tray clean up the ground there then clean where the tray bolts up as this aids in chassis grounding remove ground cable from bellhousing before you reassemble install star washers btween cable ends and where they bolt up this will dig into ground surface and cables making a better ground then remove turn signals in front there are two on right side and one on left side cleanup and star washer then there is the ground spots for the ecm inside removr kick panel on right side clean up and star washer if the starter doesnt work after this starter is probably bad but the other codes will probably clear out

Jul 29, 2009 | Kia Sportage Cars & Trucks

Not finding what you are looking for?
1996 Dodge Intrepid Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides