Question about Nissan 200SX

3 Answers

Hi there i have a nissan silvia sr20det and i just put in a boost controller and turned the boost up to 14 psi and when you put your foot down and the boost kicks in it loses power and coughs and splutters would this have any thing to do with the big hole in the centre muffler? cheers

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My 1987 pulsar with a CA16DE DOHC looses fuel pressure when it sets over night. I have replaced the fuel pump and the external return valve on the tank. the injector seals at the intake are in good condition. The injectors are the ones with the hose that is crimped at both end. Any idea why it loosed pressure and seems like it is out of gas at first start up. It starts good after that.

Posted on Oct 31, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

Most turbo cars have an overpressure switch which cuts the fuel pump or ignition. This is to protect the engine in case the wastegate fails and there's nothing to limit boost. Some are a stand alone, adjustable unit while some are built into the ECU. (If there's a pipe connected to the ECU it will be for manifold pressure/vacuum) I don't know where yours will be so you'll need a decent manual or try tracing pipes to see where they go. I'd recommend the former.

Posted on Aug 26, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 674 Answers

The hole in the muffler cant hep. how does it run without the boost controller?

Posted on Aug 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i put 14" rims and tires on my car?


yes but they may rub on tight turns

Dec 14, 2009 | 1996 Nissan Sentra

1 Answer

OVER HEATING AND PERFORMANCE ISSUES


hi, I have a 91 Nissan Terrano 2dr TD27 engine
When I first got the car all was good apart from the turbo coolant hoses needing a bit of TLC.
I am now having overheating problems which have progressivley got worse, to the point of which i drive on the road more than 20 min and it starts to get up there in heat.
I have removed the viscous fan and replaced it with an 16 inch thermo fan with a temp switch, and still have the same problem, I have had it off road since and if I dont put my foot down its not as bad like if i just cruise or some thing but if I try to climb a dune i get half way and temp is almost on 3/4.

The other issue i have with the old girl is its so gutless its not even funny, I have put a boost control in as well as boost guage, and the most i get out of it is 6psi and im sure thats not normal.

if any1 can give me any info that would be great
Thanks Neil

Dec 08, 2009 | 1991 Nissan Pathfinder

2 Answers

How to turn up the turbo psi boost in a 2005 ford f-350 6.0 liter Superduty


You just can't turn up the turbo boost any more with the new engines. If the turbo start to boost more then the PCM is programed to, it will cut the fuel pressure down and you loose more HP. Here is a link for you if your looking to get good HP out of your 6.0 liter diesel. You can replace the wast gate for the turbo with a higher PSI rating but your going to have to by a electronic boost builder for the PCM so it will not kill the fuel pressure soon as you start making more boost. http://www.thoroughbreddiesel.com/bd-diesel/turbo-boost-builder.htm and http://innovativediesel.com/ Good luck and hope you get the HP your looking for to get out of your engine.

Oct 31, 2009 | 2005 Ford F 350 Super Duty

1 Answer

Sr20det rpm drops once releasing throttle pedal nearly stall


turn up the idle i believe it behind the intake manifold looks like a screw. Also check to see if your firing on all cylinders.

Jul 30, 2009 | 1998 Nissan 240SX

2 Answers

Need a diagram on the nissan sr20det engines


would like a diagram of the Nissan sr18 and nissan sr20 timing chain

Mar 01, 2009 | 1996 Nissan Maxima

2 Answers

Bad MPG


try some of the Lucas product for diesel engines,
diesels are made for hard work/pulling. not for fuel economy
the best thing you can do is to keep the fuel filter changed as often or sooner than the manual recommends. it will be the heart to a happy diesel

Feb 23, 2009 | 2008 Ford F-250 Super Duty

2 Answers

Still cutting out


could be associated with ur turbo, "boost lag" have u turned up your boost latly?? the talon stock turbo is only good for 12-14 psi 14 max any higher and it sounds very bad on the motor

Jan 11, 2009 | 1991 Eagle Talon

1 Answer

Where is ccoling temp sender 1.6 96 nissan 200sx


This is for the 2 litre SR20DET engine so not sure if that's what you have - never heard of a 1.6 version. Below is the exploded diagram and a test for the sensor.

96fe380.jpg

8d1e360.jpg


Oct 20, 2008 | 1996 Nissan 200SX

2 Answers

1996 Nissan 200SX


send at my web site
www.fastboyz.net

Aug 25, 2008 | 1996 Nissan 200SX

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...