Question about 1998 Oldsmobile Intrigue

4 Answers

Replacement of button on shifter for a 2000 olds intrigue

How do you replace the shifter button ? the button poped out and is broken.

Posted by on

  • 5 more comments 
  • dwiley2 Oct 11, 2008

    The plastic button popped off and makes shifting a bit of a problem. Must be some simple trick of getting the handle off.

  • dpmorgan80 Nov 27, 2008

    My button popped off also and not it is stuck in park.  Is there any way to get it out of park?  Can the handle be taken apart?  

  • deithra miller
    deithra miller Jan 07, 2009

    i have the same problem... i just keep the button in the car... but i would love to know how to fix this

  • Anonymous Jan 13, 2009

    When mine popped out, I kept it in the cup holder. It's a bit like an extra theft prevention feature, since you can't get the car out of park without it and an anxious thief might not take the time to figure it out.

  • JAYLON 14 May 11, 2010

    HOW DO YOU REPLACE THE SHIFTER BUTTO OR THE OVER DRIVE BUTTON?

  • Anonymous Apr 01, 2014

    How do I remove the shifter handle

  • Anonymous Apr 01, 2014

    I want to remove the shifter handle

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I fixed mine at a junk yard. It's a simple wire C clip in the front of the handle and the whole thing slips right off. They sold me another handle off a pontiac. They pulled the old one and installed the new one for $25.00 total.

Posted on Oct 16, 2008

  • pagepg Mar 22, 2014

    On my 2000 Intrigue samething button popped off, I read this aboutC clip and had it off in less than 2 minutes. On way to parts place. Thx just saved me dealer labor fees..

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I solved this by threading the button with fishing line. Drill with a thin bit along the surface where the thumb touches. Drill about ¼” below the surface across the long distance. Drilling through the plastic is very easy. Now drill two holes on the shift ball about ½ “ from the opening. Again drilling through the material is very easy. Thread the button with fishing line and tie it under the ball.

Posted on Sep 26, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I drilled a set screw into the bottom of the shift lever (threaded the hole). It works and it does not show. The lip of the button stops it from flying across the inside of the car.

Posted on Nov 10, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

FOR A 2001 OLDSMOBILE, THE OVER DRIVE BUTTON POPPED OFF. CAN I REPLACE IT AND WHERE?

Posted on Oct 16, 2008

  • JAYLON 14 Oct 16, 2008

    HOW DO YOU REPLACE THE OVERDRIVE BUTTON FOR A 2001 OLDSMOBILE INTRIGUE?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 oldsmobile intrigue stuck in park


Check to see if you have brake lights, If they don't work replace the brake switch at the pedal. This will also let the shifter out of park. If they do work there is a solenoid at the shifter. Column shifters, replace the solenoid. Console shifters you have to replace the entire shift.

Sep 05, 2016 | 2001 Oldsmobile Intrigue

1 Answer

Replace heater core


Heater Core replacement 2000 Olds Intrigue - Car Forums and ...

www.automotiveforums.com > ... > Oldsmobile > Intrigue
Jan 1, 2014 - Trying to replace the heater core in my Intrigue. I've done heater cores before- perhaps a dozen. Mostly in the late 80's. Hate the job with a ...

Heater core shortcut - YouTube

? 4:40
https://www.youtube.com/watch?v=LsZoFoiJsdw
Apr 26, 2009 - Uploaded by realfixesrealfast
A short cut for removing a heater core on a Ford Taurus. ... 04 Jeep Grand Cherokee: how to remove dashboard and replace Heater Core / AC ...

Heater Core Replacement Olds Silhouette Chevy Venture ...

? 6:18
https://www.youtube.com/watch?v=rW23CtepYWU
Sep 8, 2014 - Uploaded by Buckwsr
I walk you through replacement of the front heater core on a 2000... I just finished replacing the fuel pump and sending unit on my2000 Olds ..

Oct 09, 2015 | 2000 Oldsmobile Intrigue

1 Answer

How to replace 2000 oldsmobile intrigue shifter knob


how do i remove shifter knob on 2000 olds intrigue

Sep 21, 2010 | 2001 Oldsmobile Intrigue

1 Answer

2000 Olds Intrigue fuel gauge reads randomly incorrect


The Olds Intrigue along with several other models had issues with the sending units in the fuel tank.
the resistor board and the metal contacts wear and lose contact.
The sending unit will need to be replaced.
The fuel tank will need to be dropped in order to replace it.

May 31, 2010 | 2000 Oldsmobile Intrigue

3 Answers

Is it a timing belt on olds intrigue 2000, 3,5L?


this engine uses a timing chain, chains require no replacement unless the engine is being repaired or the chain or spockets fail

Mar 26, 2010 | 2000 Oldsmobile Intrigue

1 Answer

Where do I find detail instructions for removing the cover and replacing a broken plastic release button on the shift lever on 2000 Olds Intrigue?


Go to your local auto parts store and get a Haynes or Chiltons manual should have instructions on how to take it apart as well as houw to switch it out.

Sep 15, 2009 | 2000 Oldsmobile Intrigue

1 Answer

Please help, I have a 99 olds intrigue and I pulled to a red light and it would not go into drive , we stops the car and turned off and it started back and went into gear for a minute then would not go in...


I had the same problem with my Intrigue. It may be a bad spring in the shifter head. It wouldn't engage the shifter when pressing the button. Easy was to find out if thats the problem is locate the pin behind the shifter head, pull it out with a flat head screwdriver and pull it off the shaft. you will see a plastic shaft sticking up from the center of the main shaft. Press that down and try to put it into gear. If it works then you need to replace that shifter head. I bought one for $15 at a junk yard. Hope this helps.

Aug 30, 2009 | 1999 Oldsmobile Intrigue

1 Answer

2000 Olds Intrigue "poping sound turning at low speed


maybe you didnt get the cv joint locked all the way in?

Feb 09, 2009 | 2000 Oldsmobile Intrigue

1 Answer

Wont shift from park


Check and or replace the switch on the brake pedal, or check the lock out mechanism in the shifter.

Dec 15, 2008 | 1998 Oldsmobile Intrigue

Not finding what you are looking for?
1998 Oldsmobile Intrigue Logo

1,256 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...