Question about 1998 Dodge Intrepid

1 Answer

1998 Dodge Intrepid wont start

Sometimes it will start normally and sometimes the engine kicks and shuts off and when it starts normally and i put it in gear it shuts off i have taken it to a dodge dealership to run an OBD scan and it says i need to replace my NAP sensor and i dont even know what that sensor is used for and where its located can u please help me with my problem THANKS ALOT

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 6,674 Answers

Click on link below, it should give you an idea what to look for around your throttle body & air cleaner assy's.

http://www.usedpartslive.com/catalog/?N=4294967161&Nr=OR(AND(make:Dodge,model:Intrepid,year:1998),AND(universal:1))&Vi=10028+4294965604+1607&y=1998&mk=Dodge&md=Intrepid

Posted on Nov 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dodge Intrepid Problems


Do you have power on the yellow wire from the key switch to the starter relay when the switch is in the start position ?

May 12, 2013 | Cars & Trucks

1 Answer

98 intreped stalls after getting warm, about 1/2 on temp. gauge. Then it will not restart fo 15 to 20 min. Also sometimes after driving and shutting down it will not restart untill after sitting for a...


98 and 99 intrepid was manufactured with weak fuel pumps causing them to vapor lock try pouring cool water on the fuel rails on the intake to calm vapored gas then try to start it. Even the temp gauge at half way mark is probably still low on coolant causing engine to be warmer than normal causing the vapor lock to fix this problem replace the fuel pump with a 2000 or newer intrepid fuel pump that carries a little higher psi to prevent vapor lock from reoccurring this pump is compatible with your 98 it will plug right in

Sep 28, 2012 | 1998 Dodge Intrepid

1 Answer

1998 Dodge Intrepid-Need to disable factory security system to get engine to start


There are two types of alarm that was put in for Dodge and Chrysler depending what type you have I will give you the easy defeat.But first The BCM (Body control moduel) goes crazy why dont you try this method first. Roll down the window. Put the key in the ignition .Disconnect the battery negative post and positive and put them together for 2 minutes, then reconnect the positive first then the neagative.Then turn the key to the ACC position but do not crank the engine. leave for two minutes. Then see if that start the vehicle. I

Mar 07, 2012 | 1998 Dodge Intrepid

1 Answer

My 1998 dodge intrepid wont start it cranks but it wont start


2.7? Unplug the cam sensor and see if it starts.

Oct 13, 2010 | 1998 Dodge Intrepid

2 Answers

Dodge Intrepid 1998 2.7 V6. Won't start. you turn ignition key, it send power but not rich the starter. No ground on under hood fuse box. I did bypass to fuel pump, TCM shoot down and automatic shoot down...


make sure you have spark, sometimes if you start bypassing stuff the ignition works only on a resistor to much electricity and it won't work, not enough and it won't work.

Nov 09, 2009 | 1998 Dodge Intrepid

1 Answer

Vehicle Stalls


you should have engine light on and engine codes
if its the cam or crank sensors, shouldn't be the starter i would start with the ingition switch.

May 28, 2009 | 1999 Dodge Intrepid

1 Answer

1998 Dodge Intrepid won't turnover


If your talking that engine won't crank over, just click or something randomly, make sure shifter is all the way in park, or try in neutral, otherwise start relay would be another suspect area. Worse case, starter.

Apr 21, 2009 | 1998 Dodge Intrepid

1 Answer

2002 Dodge Intepid engine change now it wont start


how long ago did dealer do the job, if recently I think they should feel some obligation to assist you.

Dec 04, 2008 | 2002 Dodge Intrepid

Not finding what you are looking for?
1998 Dodge Intrepid Logo

Related Topics:

511 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...