Question about GMC C1500

1 Answer

Brake lights don't work, singal lights work but if brake is pushed the opposite light comes on

Posted by on

  • RainbowFrog1 Sep 19, 2008

    I had the same problem with my 88 C1500 thought it was the ground came to find out the rear light sockets were shot had them replaced and the problem was solved. Good Luck

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 674 Answers

You have a bad taillight or a ground problem common problem for the gm trucks

Posted on Aug 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Break lights on a 1984 chevy dump truck its a d 6500 i have turn singals but no break lights


Check the brake light switch at the brake pedal. It may be defective or mis-adjusted.

Dec 30, 2014 | Cars & Trucks

1 Answer

Rear lights don't come on with headlights brake lights work hazards & turn singals work


The tail lights are on a separate circuit bad bulbs or fuse labelled TM or tail lights in fuse box.

Oct 19, 2013 | Chevrolet Colorado Cars & Trucks

1 Answer

Replace ligth swicth dimmer swicth brakes and singal litghs work no head ligths


Sounds like your turn signal switch is bad!! Multi-functioning switch it controls your head lights two? Unless you have a push button switch!

Sep 04, 2011 | Chevrolet Chevy Cars & Trucks

1 Answer

Brake lights & Hazzard lights don't work; fuse ok... High mounted center brake light works... Turn signals work...suspect problem is multifunction lever Power drain to battery constant...2...


As for the brake lights push brake pedal down while pushing on and wiggling the hazard switch.If the brake lights come on then replace the multi-function switch.

Aug 10, 2011 | 1997 Oldsmobile Bravada

1 Answer

I have a 89 chevy 1500 the brake lights do not work. The turn singals work the running lights work but the hazzard flashers do not work either. The brake lights donot work or the hazzards donot work ,...


First check all fuses. If they look good, more than likely brake light switch is bad. Switch is mounted just above brake pedal under the dash. Small plastic switch w/a couple of wires coming from it. Easy fix.

Mar 14, 2011 | Chevrolet 1500 Cars & Trucks

2 Answers

Tail lights dont work but bake and turn singals do


did you also check the fuses under the hood, there is a 20 amp out there that feeds that circuit.

Feb 02, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Tail lights don not work including back window light and it is not a fuse either because I have checked. what is wrong. What can I check.


you can check the small button that the brake pedal pushes against when you push the brake sometimes this switch gets stuck in and does not let the brake lights come on its under the dash above the brake pedal it has two wires on it take them off and touch the two wires together and the lights should come on if they do the switch is faulty bestaluck glenn.......

Nov 11, 2008 | 1994 Ford Thunderbird

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

313 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...