Question about Mitsubishi Lancer

1 Answer

Hi im driving 2002 lancer cedia wagon 1.8 with cvt trans,when driving engine under load the car has a bad vibration that feels similar to a wheel being out of balance but as soon as you take the load of it stops, Ive had wheel alignment done wheels balanced replaced rear engine mount and checked most bolts for tightness but problem is still there can anyone help

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 60 Answers

Hi. Maybe what you need now is to have the ball bearings checked. If they're fine, the thing to do is to pack them up with grease. If need replacement, they'll provide you with a new set of them for a modic price at any auto parts store, but my personal choice is always the manufacturer dealership, so you can have the peace of mind that is an OEM part and that it will last for the longest. Usual service mileage for these parts is 50,000mi.

Posted on Aug 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 rpm goes up to 2,000 rpm when i start it and around 40 mph it feels like it slips and goes up to 3,000 and stays goes up to 4500 rpm at 70 mph burning alot of gas and my engine just started rocking...


Sounds like the clutch, if a standard trans, needs to the be replaced. If it's an automatic, you need to take it in for diagnosis. Your trans. might be going bad, slipping, may just be low on fluid, if it is use some Lucas trans nonslpi and the proper tranny fluid to fill it to the proper level. Add the fluids and test drive bfore going to the shop, unless the tranny is fuul allready.

Oct 20, 2010 | 2002 Mitsubishi Lancer

5 Answers

I have a mitsubishi lancer cedia model 2000 frequent stall when driving i switch it off and on again in the ignition and come to live again for a few miles and does the same again what could be the cause


If you have the GDI model,they were designed to run on very lean air/fuel ratio.
Once the mileage is up a bit a lot of problems can be traced back to a high carbon build up in the intake manifold.

Apr 24, 2010 | 2002 Mitsubishi Lancer

1 Answer

A loud vibrating noise from the rear while driving


maybe a bad tire, or wheel bearing, or is it more of an exhaust hitting somthing noise, if so check exhaust hangers.

Oct 02, 2009 | 2008 Mitsubishi Lancer GTS CVT Sedan

1 Answer

My car vibrates before new tires and after


vibration can be anything from brake rotors warped ,hub wheel bearing,bad cv joints or suspension part going bad -does it vibrate at different speeds or slowing down or under braking where do u feel the vibration in front or towards the back or while turning .tires dont usually vibrate unless it has a bad belt[defect in tire ]

Sep 24, 2009 | 2002 Mitsubishi Lancer

1 Answer

Bad vibration engine trans under load


seems your problem is within your clutch,defective part,usually a defective release bearing will cause gear shifter and pedal vibration but not as bad as yours,but by pressing on clutch pedal vibration stops,point to clutch!

Apr 07, 2009 | 2002 Dodge Neon

1 Answer

INSTRUCTIONS MANUAL LANCER CEDIA 2001


P`POR FAVOR COMO SOLUCIONO EL PROBLEMA DE MI VEHICULO LANCER CEDIA MITSUBISHI 2001 ,SOLO EN MARCHA PARA ADELANTE NO CAMBIA DE LA MARCHA CD QUE DEBO HACER,ES UN PROBLEMA ELECTRONICO O MECANICO,YA QUE EN EL TABLERTO TAMBOCO ENCIENDE LA LUS QUE INDICA CUANDO ESTA EN LA MARCHA D
GRACIAS POR VUESTRA SOLUCION
ATENTAMENTE
Ricardo Coronado
email ricardocoronadop@hotmail.com

Apr 04, 2009 | Mitsubishi Lancer Cars & Trucks

2 Answers

Legacy wagon , shaking when hot


front wheel drive? may not be the enging may be CV joints or wheel bearing,

Dec 20, 2008 | 1993 Subaru Legacy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...