Question about 2006 Toyota Tundra

2 Answers

Servicing tranny how do you service 2008 tundra tranny i found the drain plug but where do i fill it

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do reset warning lights on a 2001 acura tl

Posted on Feb 02, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

DONT DO IT! It has Toyota W/S fluid in it, its a lifetime fluid that doesnt have to be changed. If you can tfind a dipstick, dont touch your drainplug. It requires a complicated procedure that requires dealer only tools

Posted on Jan 26, 2009

4 Suggested Answers

greezy_je208
  • 237 Answers

SOURCE: Told to have Services done to my Tundra.

though it is a good thin to keep your automobile in good repair,it sounds to me like a sales scam. id suggest speaking to a manager.(i used to work at a for dealership, it does happen.)

Posted on Dec 15, 2009

  • 7353 Answers

SOURCE: service required is on what needs to be serviced

Depends on the mileage, its all in the owners manual.

Posted on May 08, 2010

  • 12 Answers

SOURCE: I HAVE A 2008 TOYOTA

I have the same problem few days ago, and still didn't find any solution. Can any one please help?????10

Posted on Jul 28, 2011

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Serpentine belt and instructions for 2008 Toyota Tundra 4.7 litre how to


Hey

I read your question and I think Reliable-Store can help you in this. Here's the site link. TOYOTA TUNDRA SERVICE REPAIR MANUAL 2007 2008 2009 2010 DOWNLOAD

May 27, 2016 | 2008 Toyota Tundra

1 Answer

05 transmission fluid fill plug


ah, its on the tranny. (where else?)

or RTM read the manual
here

https://suzukipitstopplus.com/Products/1035-2008-forenza-reno-service-manual.aspx

on new cars they moved it,
why
so the fiddlers (zoners and too fast lube goons) are forced to do it right. ask for right. or read it in the FSM.
all this is a product of long warranties.

Jun 27, 2014 | 2008 Suzuki Forenza

1 Answer

Changed the rear rotors and brake pads and there is a grinding noise


Here is what I have found out. I have an 2008 Toyota Tundra 5.7 4x4, and I changed the rear brakes and rotors. No noise prior to service. After installing new rotors, I started getting a metal scraping noise. After $300.00 in diagnostics, I found that the new rotors are rubbing the against the brake shield. The inner lip of the rotor needs to be machined down to avoid this rubbing. See toyota tundra forum.com for pics.

Sep 10, 2012 | 2007 Toyota Tundra

1 Answer

Need to check transmission fluid in my 06 tundra


On that particular vehicle there is no dipstick. There is a fill plug and an overflow plug on the transmission itself. To fill the transmission, you must use the Toyota manufacturer's automatic transmission fluid and have the vehicle on a flat, level surface. Remove the overflow plug and place a drain pan under it to catch any excess that runs out. Remove the fill plug, and fill the transmission with approved fluid until it begins to run out of the overflow hole. Wait until the excess has finished draining out, then reinstall the overflow and fill plugs and you're all set.

Oct 25, 2010 | 2006 Toyota Tundra

1 Answer

How many ATF go to the aut. trasmission?


You need a scan tool to check the automatic transmission fluid on this car. The scan tool is needed to know the temperature of the fluid which must be close to 40 degrees celsius. At that point you remove the fill plug in the bottom of the transmision pan and fill with fluid until fluid drains back out. Use only genuine VW fluid part number G 052162A2 or you will damage the transmision. If you fill with fluid while tranny is to cool you will over fill and damage the transmission. If you fill with fluid when the tranny is to hot you will underfill and run a slight risk of damaging the transmission. The fill plug and drain plug are next to each other so make sure you are removing the right one. <<<< The above I found on a vw site, The tranny should take about 5 qts for a filter change, or 12 qts for a total rebuild. And the fill plugs on th eside of the tranny, one should be up, that is the filler, and lower one is the level, when it seeps out the lower one, it is full. Hope this helps.

Apr 21, 2010 | 2002 Volkswagen Passat

2 Answers

I am going to attemp to change the tranny fluid in my '92 Taurus. Where is the drain plug underneath and is it true that it takes 12.8 quarts of fluid? Is there anything else I should know before I start?


well first theres no plug to drain fluid, you will have to remove the trany pan, the pan gasket and filter need to be replaced,next thing is that it doesnt hold 12.8 qts, thats only if it was dry empty,just dropping the pan doesnt get all the oil out, the converter is still full and the lines and cooler,i would replace the filter and pan gasket then take to a garage and have a bg trany service done, this service gets 100% of the old oil out,your doing a drain and fill, this only takes about 6 qts,good luck.

Mar 31, 2010 | 1992 Ford Taurus

2 Answers

How do i fill the transmission up on a 2000 ISUZU RODEO 3.2lt. V6 automatic


You can fill it, but you need a special temp guage and a hand pump. You have to get under the car to fill it. There are two plugs on your tranny oil pan, fill and drain. Just keep adding through the fill hole until it begins to drip out. The main thing is to make sure it is at the correct temp.

Mar 30, 2010 | 2000 Isuzu Rodeo

1 Answer

TRANSMISSION SERVICING


remove the drain plug and measure the amount of fluid that u have drained out of the pan, remove the tranny pan and change the filter the pan has a reusable gasket wipe it off and reinstall the pan,i found it easy to fill the tranny pan halfway up before you put it back on,let the engine run until it get to operating temperature.in the center of the drain plug you removed theres a small star head plug in the middle of it remove the plug this is your fill plug you can use a fluid exchanger to fill the tranny while its running just be patient and if you measured the old fluid that u drained youll know very close to how much youll have to put back in just remember theres no level indicator so you need to put back what u drain out if you need any help let me know

Jan 19, 2010 | 2005 Ford Explorer

Not finding what you are looking for?
2006 Toyota Tundra Logo

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...