Question about Ford Windstar

1 Answer

I have a 2000 ford windstar with a code p1518 and i would like to know how to fix it.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

P1518 Inlet Manifold Runner Control Stuck Open. Check to see if clips are broken. I would also get a haynes manual from your local parts store . Hope this helps

Posted on Aug 23, 2008

3 Suggested Answers

ZJLimited
  • 17970 Answers

SOURCE: how do i fix p1518 code on 1999 ford windstar?

P1518 - Intake Manifold Runner Control Malfunction (Stuck Open) The IMRC system is monitored for failure during continuous, key ON engine OFF or key ON engine running self-test.

The test fails when the signal on the monitor pin is less than an expected calibrated range at closed throttle.
* IMRC monitor signal circuit shorted to PWR GND or SIG RTN
* Damaged IMRC actuator
* Damaged PCM

Hope this info helps

Posted on Jun 21, 2010

  • 123 Answers

SOURCE: 1999 ford windstar code P1518

This code means the intake manifold runner is stuck open either from a faulty actuator on the intake or the valves plates are gunked up unable to move,

Posted on Jul 19, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a p1518 on Ford windstar 99 3.8.


For error code P1518 troubleshooting,click the link below :----http://schematicsdiagram.blogspot.in/2012/03/obd-code-p1518-on-ford-windstar.html
--------This will help.Thanks.

Mar 03, 2012 | 1999 Ford Windstar

1 Answer

2000 ford f150 code p1518 cost to repair?


P1518 ---Intake Manifold Runner Control
Malfunction (Stuck Open)

Price you discuss with a dealer or repair shop

Apr 06, 2011 | 2002 Ford F150 Regular Cab

1 Answer

How do i fix p1518 code on 1999 ford windstar?


P1518 - Intake Manifold Runner Control Malfunction (Stuck Open) The IMRC system is monitored for failure during continuous, key ON engine OFF or key ON engine running self-test.

The test fails when the signal on the monitor pin is less than an expected calibrated range at closed throttle.
* IMRC monitor signal circuit shorted to PWR GND or SIG RTN
* Damaged IMRC actuator
* Damaged PCM

Hope this info helps

Jun 21, 2010 | 1999 Ford Windstar

1 Answer

1999 ford windstar code P1518


This code means the intake manifold runner is stuck open either from a faulty actuator on the intake or the valves plates are gunked up unable to move,

Jun 17, 2010 | 1999 Ford Windstar

1 Answer

I have a 2001 F-150 that just kicked a P1518 Code


PO1518--Intake Manifold Runner Control Malfunction (Stuck Open )
Your either going to have to clean or replace,the actuator motor. If you don't have a scanner,to do an output test,your sort of stuck. System knowledge is the key,when doing your own work.
Someone more familar with your vehicle,may give you a better answer. It maybe a vacuum system,still you most likely will be replacing the offender.

May 12, 2010 | 2001 Ford F150 Styleside SuperCrew

1 Answer

I have a 2000 ford windstar and the codes are


Those two codes are asociated with the fuel control system and O2 sensors, I would start by having someone hook it up to a scanner and watch the funtions of the O2 sensors. If they are switching slow or are not switching at all then replace the faulty one.

Oct 17, 2009 | 2000 Ford Windstar

1 Answer

Check engine light is on i have a windstar 2000 how can i fix it. is a sensor?


you first need to get the codes pulled youre check engine light being on can be a result of any number of issues o2 sensors,ecu ,vacume leaks ext...some shops offer free code pulling and that will help you know where to start if you have an autozone around i know for sure they will pull the codes for free

Apr 25, 2009 | 2000 Ford Windstar

1 Answer

How do i fix a misfire in a 2000 ford windstar


The most common way to fix it is to do a tuneup, use a fuel system cleaner in the gas tank, and pull trouble codes from the computer to fix bad sensors.

Apr 02, 2009 | 2000 Ford Windstar

1 Answer

I NEED TO KNOW WHAT CODE P1518 MEANS. I FAILED MY EMISSIONS TEST, AND THAT WAS THE CODE THAT IT GAVE. THE DEALERSHIPS WON'T TELL ME WHAT IT IS WITHOUT ME TAKING IT THERE & PAYING.


Just a suggestion. Take it to your local Advance Auto Parts store.They will give you a FREE diagnostics test. They can tell you the problem, cost, and code meaning. I hope you the best.

Aug 04, 2008 | 2000 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

548 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...