Question about 1987 Chevrolet Monte Carlo

2 Answers

Cruis control dont work.I cant find a wiring/vaccum diagram for it.also,brake lights dont work.I believe the problem to be related.I need to know how to go about trouble shooting the problem

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Replace you brake light switch or check the connector under the dash right above the brake pedal.
You must remove the cover under the steering column (plastic panel) to access the switch. It rides right on the brake pedal arm and is a 2 inch long round switch that is black with 3 or 4 wires plugged in to it.
This should take care of both problems with the cruise and tail lights because the switch is the only common part that connects both. When you hit the brake, the cruise turns off. Hope this helps!!!

Posted on May 03, 2009

Ad

What year? I just bought a 94 Silverado Crew Long Bed and also bought a subscription to www.alldatadiy.com which I recommend to anyone, any vehicle they offer. $25 pays for itself in a couple months. I have four subscriptions.

Let me know and I'll look it up.

email me at ohayabusa-techlists(at)yahoo.com so I can send you what you need

Posted on Aug 23, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota diagram cruis control


The cruise control on modern Toyota vehicles is built into the ECU.
You may only need to install the stalk and the wire jumper that connects the stalk to the spiral cable, but some vehicles are missing the wire that runs from the spiral cable to the ECU. The parts are about $110.

Mar 26, 2014 | 2010 Toyota Corolla

1 Answer

I have a 1994 toyota 4 runner and it wont start, i took out the starter fuse and cross jump the fuse with a wire and it start but i have no brake lights heater dont work and i cant get the car out of park....


I think all of those circuits are controlled by the key switch.
I would start at the key switch and check the circuits for power.
You may need a shop manual to get all of the wiring diagrams you'll need.

Oct 14, 2012 | Toyota 4Runner Cars & Trucks

1 Answer

2005 dodge stratus cruise does not work but light comes on.


first check to see if brake lights work, because brake light switch will deactivate cruis control when you press brake pedal to slow down stop.if brake light switch okay, dealership has to check out cruise control since pcm and vechicle speed sensor control the cruise control also.

Sep 21, 2012 | 2000 Dodge Stratus

1 Answer

Looks like I have a vaccum problem on my 1990 Cadilac Brougham 5.7L: Cruise control not working (but all lights work correctly), no automatic parking brake release and no air at dashboard outlets. I...


Usually you can follow the hissing noise. Any noise inside the car? Near the brake pedal where the cruise cutoff vacuum switch is? If not, start at the throttle body. The main line runs from there to the vacuum storage canister. See diagram below.

0900c1528025ed6b-jnh1p0frnkt3q2fbcpfimq4v-5-3.gif

Aug 08, 2017 | 1992 Cadillac Brougham

1 Answer

2009 equinox drivers brake light keeps going out. Works for a while then just stops working. Bulb is fine. Also no brake lights will light up if the car is off. Also drivers door will not lock/unlock with...


Bad ground wire maybe for the left side brake light .ground connection G- 401 . Do you know anything about automotive electrical circuits ? B+ - voltage side an ground ?
Voltage drop testing the circuit is the way to find problems in automotive electrical circuits, plus looking at wiring diagrams so you know what wires you want to test. The brake lights won't work if the vehicle isn't on . Controlled by the BCM - body control module.

Basic Electricity for Service Techs Ohm law Current Flow Opens Shorts

Mastering Voltage Drop Testing with Pete Meier and Jerry Truglia

Electric Testing Techniques You Need to Know

Your best bet mite be to take your vehicle to a qualified repair shop . Electrical systems are very complex an could be controlled by the BCM - need a professional scan tool to diagnose this problems


Aug 30, 2017 | 2005 Chevrolet Equinox

1 Answer

I have problem with illumination non of the AC control / hazrd switch/heated seat switch/ cruis control switch/main light switch/. are bright please help


It may not be easy, but it sounds like a ground wire is corroided or loose. You will need a good shop manual to locate the grounds for that component. Sometimes the dealship will run you off a copy of the wiring diagram since your auto parts store more than likely won't carry that.

Mar 26, 2011 | 2002 Chrysler Voyager

1 Answer

1993 GMC K3500. Anyone know where i can find an ABS (antilock brake system) wiring diagram? When i bought my truck, it came without the ABS computer. I recently aquired the computer but still dont get...


You can find free wiring diagrams here http://www.bbbind.com/free_tsb.html Enter vehicle info. Year , make , model an engine size . Under system click on brakes .under subsystem brake control will show on it's own . Click the search button .

Apr 01, 2017 | GMC K3500 Cars & Trucks

1 Answer

Cruise control inop,cruise light comes on but does not maintain speed or "kick in" .brake swithes seem to be working,brake lights work,applied & released show on scanner through abs & pcm ,no...


BCM has nothing to do with it. The CCM - cruise control module receives input from the cruise control switch, free wiring diagrams here
http://www.bbbind.com/free-tsb enter vehicle info. under system click on engine, then under subsystem click speed control. Click the search button then the blue link.

Feb 02, 2018 | 2002 Cadillac Deville

2 Answers

Cruis control does not work


07 sebring cruise light comes on but cruise does not work i have installed a new clock spring and now the horn works but no cruise control.

Jun 16, 2010 | 2007 Chrysler Sebring Sedan

2 Answers

Looking for a diagram for ford explorer brakes


I'm not sure what you are looking for. Are you looking for brake line diagram? Diagram of brake assemblies? Vacumm diagram? Here's a couple, if they don't help, let me know exactly what you need.

vacuumlinerouting.png
abs.jpg

Jan 11, 2009 | 1994 Ford Explorer Limited

Not finding what you are looking for?
1987 Chevrolet Monte Carlo Logo

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

79847 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...