I have a 97 corolla as well, and i've changed the radio out several times on my own. if you take a small screwdriver and stick it in between the panel that goes around the around the area where the radio is, u should be able to pry it off relatively easy. just be sure to remove the sliders off the AC controls before you do. after you pop that panel off, you just have to disconnect the wiring harnesses going to the clock, hazard lights, rear defroster, and AC button. the radio is bolted in there with a mounting bracket, so you'll have to unscrew that as well. you'll need to unscrew that bracket from the radio you have in there, and mount it to the one you wanna install....hopefully this helps you out. it sounds harder than it really is.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Toyota Corolla has been around long enough that many owners find
themselves needing to replace the factory stereo. Installing a new
stereo in the Toyota Corolla gives improved sound and updated
features. Swapping out the stereo in the Toyota Corolla takes basic
tools and less than an hour. This article covers models from 1990 to
the hood and remove the negative battery cable from the terminal.
Apply the parking brake and place the car
> Remove the trim from
around the stereo by prying with your fingers at one corner. Some
early models have two screws at the top of the trim piece to remove
first. Allow the trim to hang on the drivers side of the dash if
it's connected to the cigarette lighter.
> Locate and remove the
four screws holding the stereo in place. Pull the radio out of the
dash and disconnect the wires from the back of the head unit.
> Connect the wiring
harness adaptor to the original harness and let it hang from the
dash. Slide the new stereo into the Toyota radio mounting kit, which
is a thin metal cover and secure it per the manufacturer's
instructions. Most adaptors have screws to hold the stereo in place,
however some have clips, which engage automatically. >Plug the wiring harness
adaptor and antenna wire into the back of the new head unit and push
the entire assembly into the dash. Reconnect the negative battery
cable and turn the radio on.
> Ensure all of the stereo
controls and speakers are working. Secure the radio in the dash with
the original four screws and replace the trim.
I understand you remove the panel and then for a
1990, it has a handle and you simply pull it straight out.
--- REMOVAL & INSTALLATION
Disconnect the negative battery cable.
CAUTION On models with an airbag, wait at least 90 seconds from the time that the ignition switch is turned to the
LOCK position and the battery is disconnected before performing any further work.
Remove the attaching screws from the trim panel.
Remove the trim panel, being careful of the concealed spring clips behind the panel.
Remove the trim panel surrounding the stereo
Disconnect the wiring from the switches if so equipped mounted in the trim panel.
Remove the mounting screws from the radio.
Remove the four radio retaining screws and pull the unit from the dash
Remove the radio from the dash until the wiring connectors are exposed.
Disconnect the electrical connectors and the antenna cable from the body of the radio and remove the radio from the car.
Reconnect all the wiring and antenna cable first, then place the radio in position within the dash.
Install the attaching screws.
Reconnect the wiring harnesses to the switches if so equipped in the trim panel and make sure the switches if so equipped are secure in the panel.
Install the trim panel (make sure all the spring clips engage) and install the screws. Conmnect the negative battery cable.
haha its also so easy to change the 1997 toyota corolla passenger seat first of all buy a new model car after that if you dont have the money then sale thats crolla car buy a new bike or if you want to change the seats of 1997 toyota corolla then purchase the new seats and give the money to workshop man he will change the seats ok.
Tools required: Phillips screwdriver, small flatblade screwdriver, rachet with 6 inch extension & 10mm socket.
1. Remove negative battery terminal (for stray voltage & airbags.)
2. Remove gear shift trim
3. Remove cable attached to lighter socket.
4. Remove center climate control knob and screw beneath it.
5. Gently pry both bottom corners of climate control face (up then towards the rear) until clear of lock.
6. Pull entire climate control console rearward until clips release. Leave all wiring attached.
7. Remove 4 bolts under radio (10mm.)
8. Gently pry between dash and AC ducting panel (both sides) and pull out.
9. 4 clip hold radio to ducting panel, gently pry while pulling radio out the back.
The rest should be easy...
9. 4 clips hols radio to