At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
What type of adhesive can I use to repair a landau top that is just starting to come off in the front, It is in perfect shape but has been parked for many years but the first time I drove it the front pulled out and started peeling back
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Spray contact adhesive available at any hardware store,Home Depot,Lowes etc.Spray both roof and under ripped off roof material,wait a minute and press into place.
Generally speaking, the coach company uses the chassis from GM but their own wiring for the rig. You will probably have to contact Georgia Boy to get the repair book. There may be a headlight relay that has failed.
Coil Connections: For the 3.8L SC VIN IDENTIFIER "1": (back) ___
....o <-----6 O ....o <-----3 ____
....o <-----2 O ....o <-----5 ____
....o <-----4 O ....o <-----1 (front)
For the 3.8L V6 VIN IDENTIFIER "L" There are two Types of Ignition Coil Packs: Type I and Type II. Type I is a Retangle Shaped Box. Tyoe II has three cylindrical (round) shaped towers. For Type I: Rectangle Shaped Box. (back) 3
.........6 5
.........2 1
.........4 (front)
Hey can someone help me? I've got a 94 buick park avenue and i just put a new battery in and its trying to start but won't turn over.My lights are on.But i'm not sure the name of this piece that looks cracked.Its sits in the front and looks like its barrel shaped.
do the turn signals work normally?do the tail lights work? brake lights? these are tricky, dont the rears go sequentially? I would ck the ground wire for the rear tail lights
The radiator is in the front of the car under the hood behind the grille. It will be rectangular shaped and have a fan set to blow against it. It will have a cap on the top. DO NOT REMOVE THE CAP WHILE THE ENGINE IS HOT. Beside the radiator is another rectangular shaped item that looks like the radiator but is the condensor for the air conditioner. It does not have a cap on top and is in front of the radiator.
The drain for the radiator is on the lower part. After draining be sure to close the drain before refilling.
Refill the overflow bottle as well. AFTER you refill, let the engine run for about a minute while topping off the radiator so any air will work out of the system. Then install and tighten radiator cap.
When you drain the radiator, dispose of the fluid according to local regulations or recycling center. Do not allow animals to drink any of it. It's poisonous.
You can get an auto repair manual from library, auto parts stores or the internet.
you will use a small shape putty type knife to scrape/chisel the old mirror off the frame. it will be held on with an adhesive like silicone. (wear leather gloves)
It may be the catalytic converter or exhaust pipe heat shield(s), with the park brake set and ac on at ilde push on the sheet metal shields with a broom stick and see if the noise stops. It works best with someone in the car to listen for noise changes.
×