Question about 1998 Chrysler Town & Country

2 Answers

Turn signal does not work sometimes - 1998 Chrysler Town & Country

Posted by on

  • 2 more comments 
  • Anonymous Dec 03, 2008

    turn signals not working

  • Anonymous Dec 05, 2008

    where is the turn signal relay on a olds cutlass 85 4 door

  • Anonymous Mar 27, 2009

    I have the same issue. Where my blinkers don't work.

  • Linda Smith Jan 11, 2013

    where is the turn signal relay on a town and country minivan located

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 5,568 Answers

If the problem occurs on either side, the blinker relay is getting tired.
These are mostly located under the dashboard and may be in a cylindrical can plugged into a mating connector.

If it is happening only on one side, you may have a corroded lamp socket or the bulb itself.
When the standard thermal blinker relay is used and a problem with contact or a complete bulb failure occurs, your dash indicator will blink more rapidly than usual since the blinker relay is dependent on having a certain amount of current flowing through it which controls the blink frequency.

Posted on Aug 22, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem with a 97 Town& Country LX
I replaced the flasher and have not had any more issue's.

Posted on Sep 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My turn signals works sometimes and then wont work at all


Drivers side of steering column under dash, check flasher make sure its tite, turn key to on, turn signal on, move flasher round see if turn signal starts working replace flasher try it agian might be bad connection

Feb 18, 2013 | 1998 Cadillac Eldorado

1 Answer

Turn signals and flashers 97 olds cutlass only work sometimes


sounds like a bad flasher switch. wiggle flasher switch when turn signal is on to see if it makes it work or not

Sep 14, 2012 | Cars & Trucks

1 Answer

My left hand turn signal works sometimes and sometimes it don't but when i turn the flashers on they blink but the turn signal doesn't. the right one works


check the bulb and socket it may have worked loose. if this id not it the turn signal assembly may be bad and need replaced. hope this helps

Jan 28, 2011 | 1999 Jeep Grand Cherokee

2 Answers

Where is the turn signal flasher located?


You more likely have a bulb that is no good. The next time your signals aren't working, pull over and check to see which bulb isn't working. Make sure the turn signal is on while checking. It should only be the left or right. Not both. Sometimes you can see the blown bulb with the hazards on depending on your model vehicle. Simply check the bulb thats not blinking for a tight fit. Then replace it if thats not the cure.

Apr 30, 2010 | 2006 Chrysler Town & Country

1 Answer

Left turn signal works / don't work, brake light


possibly flasher unit faulty
or turn signal switch

Feb 22, 2010 | 2000 Jeep Grand Cherokee

1 Answer

2003 Ford Explorer Sport rear turn signal acting up


if it's only the rear turn signal that does this, check the plug where the bulb snaps in. if loose or bad connection to bulb, it will sometimes work and sometimes not. if its both the front and rear turn signal bulbs, could be the combination switch. these were common failures on fords

Feb 18, 2010 | 2003 Ford Explorer Sport

2 Answers

My left turn signal works sometimes, but not all the time.


Sounds like you have a short in the turn signal switch ( in the steering column). Depending on the different functions of this switch will determine the cost. If you have one that simply works the turn signals, then your looking at about $15. I believe yours should cost around $75 since it's a multifunction type. Installation time is about 20 minutes

Jun 07, 2009 | 1996 Dodge Caravan

1 Answer

Turn signals work intermittantly


multifunction switch? I think so.

Jan 29, 2009 | 1999 Ford Explorer

Not finding what you are looking for?
1998 Chrysler Town & Country Logo

500 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...