Question about Mazda B3000

1 Answer

Replacing the heater core in 2000 mazda b3000

Posted by on

  • rajasthani02 Dec 01, 2008

    how do i change mazda protage lx heatercore?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mazda Master
  • 70,365 Answers

From Haynes Repair Manual #36071, Ford Ranger Pickups 1993 - 2005 and Mazda Pickups 1994-2005 B2300, B2500, B3000, B4000: (1)Disarm the airbag system; (2)allow the cooling system to completely cool down; (3)using a thick cloth for protection, turn the radiator filler cap to the first stop; (4)step back and let the pressure release; (5)once the pressure has been released, completely drain the cooling system; (6) working within the engine compartment, loosen the ****,ps on the heater hoses at the engine compartment side of the firewall, twist the hoses and carefully sepseparate them from the heater core tubes; (7)plug or cap the heater core tubes to prevent coolant from spilling into the passenger compartment when the heater core is removed; (8)place a plastic sheet on the floor of the vehicle to prevent stains if the coolant spills; (9)remove the instrument panel; (10)remove the PCM heat sink and ground strap; (11)remove the heater plenum chamber; (12)separate the heater core from the heater plenum chamber; (13)installation is the reverse of the removal with the following additions; (a)fill the cooling system; (b)run the engine, check for leaks and test the heater

Posted on Aug 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my air conditioner running when heat is selected on year 2000 mazda b3000.


check ur switching box make sure is turning the ac off disconnect form the switching box inside and see if ac goes off if so control box is at fault repair or replace. Good Luck

Nov 17, 2016 | Mazda Cars & Trucks

1 Answer

Will a 3.0l engine from a 1999 mazda b3000 work in a 2000 lincoln ls


The answer is "NO"

Why would you even think that was possible ?

Mar 22, 2014 | 2000 Lincoln LS

1 Answer

Heater blowing cold air


the blend doors or the one way checvalve is not workin--their vacuum operated but the doors are motor driven also--its a job to get into the dash--need a repair book etc-mite wanna take to a good independent--since its electic related try disconnectn batt or unplugn computer fora min and see if it clears

Dec 24, 2013 | Mazda B3000 Cars & Trucks

1 Answer

On a 2001 mazda b3000 3.0 v6, air blows out all vents, except panel. Just had heater core replaced last fall. This problem has just started. Any ideas?


there is a climate door or location door that is controlled by air or electric the module that moves that door is bad it is under the dash around the center of vehicle

May 23, 2013 | Cars & Trucks

1 Answer

2001 B3000 Mazda truck vibrating when idling and accelerating but not when accelerator is released. Rotten egg smell when problem began, but seemed to fade when heater turned off. No smoke or odor under...


have you had the catalytic converter checked at the local exhaust shop? try that first. is the truck a 4wd? time to start checking the ujoints. do a compression check on all cylinders and see if there is a major drop in that hole that is misfiring. let me know what you come up with.

Mar 05, 2009 | 2007 Mazda B3000

2 Answers

Flasher Relay location- 1998 Mazda B3000 pickup 4x4


it's basically a stand alone relay... most times... look for a relay by itself and often round. my ford winstars flasher relay was actually located in the fuse box under the drivers side dash. it was blue and larger then the other relays so that may be a clue to you.

Robert

Please take a moment to rate this solution

Feb 02, 2009 | 1998 Mazda Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

2,127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...