Question about 1996 Mazda 626

1 Answer

Engine parts Cylinder head

I hava a problem With my MAZDA 626 2,0i 1996 modell
The Cylinder head is broken I´ve bought a Mazda 626 1,8i 1994 modell for spare parts and i was wondering if the Cyliderheads are the same or is it Totaly wrong

Posted by on

  • Miata79 Aug 22, 2008

    I heard that the only diffrence on the 1,8i and 2,0i is that the Length on the pistons movment is shorter on the 1,8i then the 2,0i.
    Does anybody know if this is correct?

  • Miata79 Aug 22, 2008

    I heard that the only difference on the 1,8i and 2,0i is that the Length
    on the piston movements is shorter on the 1,8i then the 2,0i.
    Does anybody know if this is correct?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 96 Answers

Check the casting number on the two heads and see if they are the same. If not, your best bet is to call a machine shop and give them the casting numbers and see if they are interchangable...

I hope this helps

Posted on Aug 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace the timing belt on a 1994 mazda 929 3.0 dohc 24 valve engine


Choose:

1994 Mazda MPV timing belt replacement, 6 cylinder DOHC ...

? 3:46
https://www.youtube.com/watch?v=sD2G-NzycvU
Aug 11, 2011 - Uploaded by rsarp
1994 Mazda MPV timing belt replacement, 6 cylinder DOHC 3.0... engine so the valves would not be bent ...

How to replace the timing belt on a 1994 mazda 929 3.0 ...

www.fixya.com/.../t25991928-replace_timing_belt_1994_mazda_929_3...
4 hours ago - how to replace the timing belt on a 1994 mazda 929 3.0 dohc 24 valve... I have a 2000 Mazda 626 4cyl 2.0 liter DOHC engine replacing the timing belt, what ... 2004 6s, 3l. where is the canister purge valve solenoid located?

Where are the timing marks on a 1994 mazda 929 3.0l - Fixya

www.fixya.com/cars/t25991952-timing_marks_1994_mazda_929_3_0l
4 hours ago - where are the timing marks on a 1994 mazda 929 3.0l - Mazda Cars ...1994 Mazda E2000 Cam Timing Mark Positions to Replace Timing Belt ... on a 1994mazda v6 dohc 24 valve engine How to align the timing mark on the ...

Mazda Timing Belt Replacement



Dec 03, 2015 | Mazda Cars & Trucks

1 Answer

How much is the engine head of Mazda 3 1.6 2007 16 v


Mazda 3 Cylinder Head ' eBay

www.ebay.com/bhp/mazda-3-cylinder-head
eBayEngine Cylinder Head Bolt Set Fel-Pro ES 72207 (Fits: Mazda 3) ... 2.0l & 2.3l dohc l416v, w/ turbo, "duratec" 2004 - 2009 mazda 3 2.3l dohc l4 16v. 2007 - 2009 ... #O608 RIGHT CYLINDER HEAD 2007 MAZDA3 2.0 MANUAL 4683894AC.

Oct 29, 2015 | Mazda Cars & Trucks

1 Answer

What are the torque specs of the head bolts of a Mazda protege 94


step 1 17-19 ft/lb
step 2 90 degrees
step 3 additional 90 degrees
engine uses Torque To Yield head bolts
New head bolts must be used when cylinder head is replaced or re-installed

stockam auto

Jul 05, 2011 | 1994 Mazda Protege

2 Answers

Sparkplug gap 94 mazda 626


Make: MAZDA
Model: 626 - LX
Year: 1994
Engine: L4 - 2.0L - FI - - GAS

Part Number RC12YC
GAP .044" w/DOHC (Original Equipment Manufacturer and/or Original Equipment Equivalent)


Make: MAZDA
Model: 626 - LX
Year: 1994
Engine: V6 - 2.5L - FI - - GAS

Part Number RC12MC-4
GAP .044" w/DOHC (Original Equipment Manufacturer and/or Original Equipment Equivalent)


Hope helps (remember to rate this answer).

May 13, 2011 | Mazda 626 Cars & Trucks

1 Answer

What is the purpose of the water sending unit located at the thermostat?


For 1994 Mazda Protege 1.8L MFI SOHC 4cyl the Coolant Temperature Sensor is located under hood, driver side, upper engine area, end of cylinder head, mounted in top of water outlet, work for activated the electrci cooling fan whan is necessary.

Feb 07, 2011 | 1994 Mazda Protege

1 Answer

1994 Mazda B3000 V6 engine oil pushes into coolant. Have to add engine oil all the time and drain the recovery bottle. 65,000 miles. Never been overheated.


Failure of head gasket between cylinder head and block.

Because oil pressure is higher than coolant pressure, oil will creep across poor sealing area of head gasket from the oil riser drilling that feeds the cylinder heads cam assembly's.

Worst case scenario would be a cracked cylinder head/s. No totally unheard of but rare.

Continued oiling of the coolant system will rot out the coolant hoses from the inside to the point they will burst.

Due to the year of this engine it may be prudent to find a used engine with less miles and swap it out.

Jan 18, 2011 | 2007 Mazda B3000

1 Answer

There is a misfire in cylinder 1. I have a 1996 Mazda Protege. The engine was just tuned up 4 weeks ago. What is the problem and how do i fix it?


1996?? trade it in on renewal plan is best advice ,but in all honesty i would need to have my head under the bonnet to have a look and kick the front wheel .could be anything from a coil pack to a valve ??

Mar 04, 2010 | 1996 Mazda Protege

1 Answer

94 mazda B3000 3.0L cylinder head torque specs


Step 1 torque to 59 ft pounds
2. Loosen one full turn
3. 37 ft pounds
4. 68 ft pounds

Use torque sequence below
aca9f77.gif

Sep 17, 2009 | 1994 Mazda 2WD B Series Pickup

1 Answer

Torque on 1994 Mazda pick up


if its a four cylinder(lets hope)the specs are 80-90ft.lbs torque.if its a six cylinder it is 14ft.lbs torqueat 90 degree intervals then repeat until correct torque has been reached.bad news is you can not use the same bolts on the six cylinder engine.have to be new to keep from breaking them

Jul 24, 2008 | 1994 Mazda 2WD B Series Pickup

Not finding what you are looking for?
1996 Mazda 626 Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...