Question about 1997 Honda Accord

2 Answers

Running lights work but brake lights wont - 1997 Honda Accord

Posted by on

  • Dj latin pro Jan 20, 2009

    i have the same problem on my 97 civic i replaced the break switch and still no break lights runners work

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Try this... there could be a (break light switch ) its under the dash on the driver side jus follow the break pedal up and there could be a lil plastic sensor that is touching the arm that the pedal is attached to.. it should jus unplug and you can replace it. I had the same problem with my volvo.. should be the same concept... it tells the car when the lights come on... Hope this helps u out.

Posted on Dec 30, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

There are only two things i can think of, i maybe wrong though.

1. check fuse on fuse box. guide on where the fuse is on the cover of the box.

2. check bulbs, brake lights should be double-contact. meaning there is a high and low light.

Posted on Aug 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Radio, Brake Light, Interior lights, And Wont Shift Out Of Park.


This problem sounds like you dislodged the switch on the brake pedal lever. You need the signal to unlock the vehicle from Park. You will probably find that the Brake lights do not work when you press the brake pedal.

Now if the switch is good, you probably broke the fuse feeding power to the switch. You can get a wiring diagram online by running a Websearch or going to Autozone.com and registering your car. This site has a HELP section at the bottom of the page and you would need to toggle between free and pay info.

Mar 19, 2014 | 1998 Ford Escort

1 Answer

My rear lights wont come on even though the brake lights and the head lights work. is it the running light modulator


If your car uses a modulator it might be the problem. Or the tail light fuse or the headlight switch.
The tail lights are on a different circuit from the brake lights.

Aug 21, 2012 | Cars & Trucks

1 Answer

2000 excursion 4wd -rear parking lights - do not work


if your brake lights wont work your stop light switch it bad it's under the brake pedal.

May 06, 2010 | 2002 Ford Excursion

1 Answer

The brake lights wont work. The brake light over


the break light wire on the lumina runs through the blinker switch or multifunction switch on the colum.. check there as well as at the tail light sockets. on the late 90s gm cars the sockets had a tendancy to rot away... use a test light at the brake light wire in the trunk and have a friend apply the break. if there is power then may have to get new tail lights. or replacement bulbs.

Mar 13, 2010 | 1997 Chevrolet Lumina

1 Answer

Rear brake light on a 2000 chevy malibu wont work. just the drivers side. passengers side works fine. replaced bulbs but wont work


check or put a ground wire on the light. maybe its bad. run from brake light to a suitable ground, to see if it works.

Sep 27, 2009 | 2000 Chevrolet Malibu

2 Answers

99 JEEP BRAKE LIGHT WONT WORK..THIRD BRAKE LIGHT WORKS


on chrysler products the third brake light is run independant of the body control module, try checking the fuses that run the brake lights and see if any are faulty if not check you have voltage at the switch and a signal getting to the lights.

Aug 26, 2009 | 1997 Jeep Wrangler

1 Answer

Brake lights wont work


Review the pedal switch and help you with the wiring diagram:
- ZJ-Secc-5-Brakes (Page 48)
- ZJ-Secc-8W-Wiring-Diagrams (Index - Page 35)

Good luck... remember rated me.

Jul 30, 2009 | 1994 Jeep Grand Cherokee

1 Answer

Daytime running lights and wipers wont work


Had the same problem with my 97 Jetta it turned out to be the ignition switch. No problems since

Sep 15, 2008 | 1997 Volkswagen Jetta

3 Answers

Back tail light wont work fuse is not blown, my revers light work, and my brake light, but my running brake light isnt


tail light will not work when i turn my lights on in my vauxhall cavaleirbut my fog light works when i tun it on
on my passenger side

Jul 20, 2008 | Mitsubishi Galant Cars & Trucks

Not finding what you are looking for?
1997 Honda Accord Logo

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...