Question about 2001 Ford Focus

1 Answer

Fuel Pump i am have a problem with my ford focus LX. the codes read Fuel Pump Driver Mod and Cyl 1 & 2 Misfire. i have replaced the spark plug. when i pulled out Cyl 2 spark plug it had either Oil or Gas in the threads and it was still wet. now it wont start. i am not for sure how to test if it is the driver mod or the fuel pump now. can you help me?

Posted by on

  • sandowen Aug 21, 2008

    and i do not hear the fuel pump turning on while keys are on the on poistion.

  • sandowen Nov 13, 2008

    alright well this porblem is no longer mine. Took the ford in to the dealer and got a new car. Thank you all for your help.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 21,990 Answers

Number 2 cylinder has broken rings ,or the coilpack/leads need replacing check for current to fuel pump if no power checkfor spark if no spark either it could be immobiliser

Posted on Nov 12, 2008

  • Colin Stickland
    Colin Stickland Nov 13, 2008

    only wish i could afford to do that but i am only a mechanic

×

2 Suggested Answers

SOURCE: can you help me please?

Clicking noise and won't start.

Posted on Aug 23, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 07 forenza had a code come up saying misfire on 1 and 4 plug so I replaced coil pack now it's reading #3 misfire and has a sluggish take off.Any ideas are appreciated


The sluggish take off is most likely due to a misfire. Pull the spark plug wire on cyl#3 and hold it over an engine ground. It should spark constantly with engin cranking/running. If spark is present..... most likely a bad spark plug. However, there are many more things that can attribute to a misfire but this is the most common

Jun 21, 2015 | Cars & Trucks

2 Answers

Random misfire with code PO300 07 Nissan titan. Put new spark plugs in and a fuel pump still hase vary bad miss


P0300 is random misfire code P0301 would be cyl # 1 etc.
With the odb2 scanner at erase codes turn the engine off. With the key in the run position erase the codes. Run the diagnostics again. If you still have P0300 code Check the plug wires. Loss of compression will cause misfire but it would not be random.

Feb 16, 2015 | 2007 Nissan Titan Crew

2 Answers

Help on finding out wind star coads PP0171-/-P074-/-P0401


first PO171 o2 bank 1 s1 lean PO174 o2 bank2 lean
PO401 cyl 1 misfire
when an engine misfires the oxygen sensor will read the oxygen from that cyl sensor doesnt read fuel so every misfire is a air pump to diagnose we have to fix misfire first check the coil wires and plugs for cyl 1 use spray bottle with water run engine hot at idle spray wires with water if enging runs rough shakes or stalls then replace the wires dont spray with to much water if the wires are real bad you may not be able to restart engine

try this first once fix misfire clear codes and drive it

plz comment vote reply if you need more help

Jan 17, 2011 | Ford Windstar Cars & Trucks

1 Answer

I have a 2003 Expedition 5.4L Triton. Two days ago, with low gas (38 miles to empty), engine started running rough. Code read P0302, misfire cyl. 2. Since it had 113K miles, I figured its time to change...


Most likely the coils. Easiest way to check is swap them with another cylinder, start it, pull the plug wire connecter and if it doesn't change the engine the coil is bad. If it is the injector, then you can check it with an ohm meter. Touch the leads in the injector it should read 11 to 15 ohms. if you need help let me know.
Randy

Dec 02, 2010 | 2003 Ford Expedition

1 Answer

P0303 and P1300 together (Cyl. 3 Misfire)


CODE P1300 IS MISFIRE DETECTED FUEL PROBLEM. WHICH MEAN 3 FUEL INJECTOR IS CLOGGED UP.HAVE FUEL INJECTORS CLEAN AND CHANGE FUEL FILTER.

Jul 24, 2010 | 1999 Audi A4

2 Answers

1998 Park Avenue: it may not be getting fuel how can i verify this??...


the easiest and fastest way is to listen for pump activation when you turn you key to the on posistion turn your radio off turn the key to on (just before the point of starting)and you should be able to hear the humming or vibrating if you dont then you are not getting fuel. if the pump is working or you cant tell if it is go to the fuel rail look foe a cap that looks like a valve stem cap take this cap off and push the stem in if you get fuel then you know that you donthave a fuel problem if you dont get fuel to the rail then its probably the pump. hope this helps you.

May 07, 2010 | 1998 Buick Park Avenue

1 Answer

P0301


Check obvious first, starting at plug wire, to make sure it's getting spark to plug, then pull plug to see how/if, it appears to be firing. No spark to wire, check coil. If spark is good to plug, and plug firing, time to check if fuel getting there,and if no, could be caused by faulty oxygen sensor, bad injector, just as starters.

Dec 22, 2009 | 2001 Ford Taurus

1 Answer

Engine warning light comes on, diagnostic says


if your car give you i code thats says mutlipul misfire on number 1,2,3,or four cyl. that means that that cyl is not firing when its suppost to so if the code says number 3 cyl misfire or multipul misfire replace number 3 spark plug and coil pack and 80% of the time that will solve the problem.

Oct 08, 2009 | 2006 Ford Focus

1 Answer

2000 FORD FOUS MISFIRE


try a new set of spark plugs if that does not work it might be ignition related, a plug wire or something like that.

Jun 08, 2009 | 2000 Ford Focus

1 Answer

Can you help me please?


Clicking noise and won't start.

Aug 21, 2008 | 2001 Ford Focus

Not finding what you are looking for?
2001 Ford Focus Logo

Related Topics:

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...