Question about 2003 Chrysler Voyager
I commented yesterday that I had the same problem and had done some tests in an attempt to identify the cause.
I contacted a local mobile mechanic, and when I described the symptoms, explained the tests that I'd carried out, and told him of my theory that the fuel filter might be partially blocked he said, "Yes, I'm sure you're right. I've had to do 14 Voyagers in the last month with the same problem!" Hopeful that he was right, but still a bit sceptical because the car had a service less than a month ago in which the fuel filter was listed as one of the replaced parts, I called him out. He came, removed the old filter, commented that "The old filter is really dirty and doesn't look to have been replaced for at least 25,000 miles!" inserted a new filter and the car has been running perfectly since. There's a marked improvement in the way the engine's running (not really surprisingly!) and this reinforces my belief that most (but not all) garages are only interested in taking your money and not doing the work.
For anyone interested, the process of replacing the filter was relatively straight forward and I think (if I ever have this problem again) I will replace it myself. On my Voyager (2001 RHD UK spec 2.5l TD) The fuel filter is located in the rear fuel pump, situated just forwards of the rear axle, on the driver's side of the fuel tank. The filter is removed by using a spanner of about an inch. Note, once the new filter is inserted it's important to prime the engine well before starting it otherwise it will need to be bled (which is apparently a tricky job on the Voyager!) To prime the engine and get fuel through before starting it, you must turn the key in the ignition so that you hear the pump working (eventually the pump noise should stop), and repeat this several times (we did it about 10 times) before turning the key further to turn the engine over. This process makes sure that there's a constant stream of fuel through the new filter and up to the front where the engine is!
That's all the mechanic did, and it worked! Even my wife's happy (of course all things are relative!)
Hope this helps,
Posted on Dec 31, 2008
It is ur crank shaft sensor i had the same problem get a new 1 and install ur self
Posted on Sep 20, 2009
Have you changed the fuel fillter, because my voyager was cutting out at 2 thousant revs, but now its fine.
Posted on Nov 29, 2008
We have a 2001 2.5crd grand voyager and we bought it from its orinal owner 5 years ago
Within a month the problem started cutts out while driving wont idle we have been to chrysler dealer and they said no fault showing however we took it to a diesel specialist and they say tht it is th einjectors they are no good need replacing...l.cost fortune!!
Strikes me there are a hell load of people with these cars that have the same prob ...now either chrysler know this will happen and make them loads of money or there is a prob they dont know...no one at chry wants to help.......so i went in the show room and told everyine not too buy one as although they look great they preform ****...
still have problem and fed up
Posted on Jul 14, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Mar 09, 2016 | 2007 Chrysler Grand Voyager
Aug 21, 2008 | Chrysler Voyager Cars & Trucks
Jun 22, 2014 | 2001 Chrysler Voyager
May 01, 2013 | Cars & Trucks
Sep 28, 2011 | 2000 Chrysler Grand Voyager
Nov 29, 2010 | 2004 Chrysler Voyager
Jul 15, 2010 | 2002 Chrysler Voyager
Jan 26, 2010 | 2004 Chrysler Voyager
Dec 18, 2009 | 2003 Chrysler Voyager
Feb 04, 2016 | 2003 Chrysler Voyager
7,416 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: