Question about 1999 Ford Super Duty F 550

1 Answer

How do you replace a driving belt on a 1999 AU ford falcon

How do you replace the driving belt on a 1999 AU ford falcn

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Start by unplugin the electric fans then remove the two 10mm bolts holding them in, the bottom of the fans are held in by a slot that they sit in so after you remove 2 bolts just lift the fans out. then you will see a tensioner i think it has 3/8 drive square hole in it( could be 1/2'' drive) just pull it down with a long bar with a 3/8 end on it to release the tension, while doing that slide the belt of,. if your car doesnt have a picture diaghram on the under side of the bonnet for drive belt routing draw a picture incorprating all the pulleys an how the belt goes around them. once the belt is of put the new one on exept over the power steering pump pulley, then pull on the tensioner again to release tension and slide the belt over the p/s pulley. these instruction are for the 4.0l falcon motor, the 5.0 v8 is really similar

Posted on Apr 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 AU ford falcon alternator change over.?


Disconnect battery take note of the way the drive belt is fitted write it down using cogs as markers then draw the belt onto them in same order (belt only fit one way) then with a 3/8 ratchet leave r the adjuster and remove belt unplug wiring undo bolts holding it to the motor.

Sep 25, 2016 | Ford Falcon Cars & Trucks

1 Answer

Looking to travel 15 hrs. Ctrl South east au, in 1999 Astra. Some tips or ideas what usual go wrong with the car? Car is from friend mech. Iv done basic services, the timing belt is my focus.


TS Astra timing belt - Automotive - Whirlpool

forums.whirlpool.net.au > Automotive

WhirlpoolApr 6, 2007 - I'm considering buying either a used Ford Focus or Holden Astra, and have been ... i had my car serviced and timing belt changed, had a wheel ... I just did a full service at ultratune on my 1999 Astra, did the 60,000 km service. Timing Belt Replacement Cost - Servicing
Sep 17, 2014
Holden Astra known issues? - Holden
Dec 12, 2012
Astra or Focus manual Diesel? - Ford
Sep 26, 2010
astra a lemon?
Sep 5, 2008
More results from forums.whirlpool.net.au

Timing Belt & Water Pump Replacement : Water ... - YouTube

? 4:11
https://www.youtube.com/watch?v=mRHa0LJR9HA
Dec 7, 2008 - Uploaded by expertvillage
This is my first timing belt change on my 2005 Toyota Sienna; and I am .... just switch my cam sprockets backwards and upgrade my 2.0 to a 2.4.

Jan 05, 2016 | Cars & Trucks

1 Answer

Red fanbelt light on dashboard on AU Ford Falcon. If it comes on what does it mean??


have a look under the hood as it probably means that the belt is broken, needs replacing or needs adjustment.

Dec 14, 2014 | 1999 Ford Falcon

1 Answer

Replace a fan belt on 1999 AU Falcon


replacing fan belts is easy except for some model have a vry little room to work on... to replace belt, 1st look for the tension pulley, its an indipendent pulley that its only purpose it to stretch the belt. at the back of that pulley you'll see a bolt loosen it then lose also the tension bolt located near at that area too... once youve done that it would be easy for you to remove and replace the belt... hope that helps..

Mar 31, 2011 | Ford Fairmont Cars & Trucks

1 Answer

Ford AU 1999 6 cyl auto Drive pulley outer has move forward causing the pulley belt to come off and shred. Can the outer part be pushed back? Or is replacement the only fix? The motor has not over...


unfortunately you have to replace it as it is a weight that valances the crank shaft if push in and is not in the right position it may cause more damage in high rpm like vibrate or even brake the crank shaft you will need a harmonic valance puller to remove please let me know if this helped if you need further assistance i'll be glad to help.

Mar 06, 2011 | Ford Five Hundred Cars & Trucks

1 Answer

Need diagram of how to replace drive belt on a ford AU 2000 FALCON PLEASE


for the most part there is a diagram under the hood but give this website a try drive belt diagram www.webcrawler.com if all stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man.

Oct 23, 2010 | Ford Fairmont Cars & Trucks

1 Answer

1999 ford contor timing belt broke when driving is motor freeruning or intererence motor


According to the Gates site (mfg. of belts and hoses) it is not an interference engine. I would check the compression when I replaced the timing belt as bent valves will show up on this test.

Nov 01, 2009 | 1999 Ford Contour

1 Answer

I need a diagram of how to route a serpentine belt on a 1999 zx2


Please pick the right one:


0a98258.gif
Accessory drive belt routing -Ford/Mercury 2.0L (VIN P) SOHC engine with A/C


7134bd7.gif
Accessory drive belt routing -Ford/Mercury 2.0L (VIN P) SOHC engine without A/C

Issues right now....I have one more picture for you....

Oct 19, 2009 | 1999 Ford Escort

1 Answer

Replacing timing belt on a 1999 ford contour 2.0


moz-screenshot-6.jpgCAUTION The 2.0L engine is an interference motor. Extending thereplacement interval could lead to the belt breaking and severe andcostly engine damage. Care must be taken if rotating the crankshaft orcamshafts with the belt off, if resistance is felt, do not force themto turn.

0900c152800a89b9.jpg

0900c152800a89bb.jpg

Apr 10, 2009 | 1999 Ford Contour

5 Answers

Serpentine belt replacement


2.0L Engines
See Figures 11, 12 and 13
The accessory drive belt for 2.0L engines has no provision for manual belt adjustment, since these engines use an automatic belt tensioner. Drive belt slack is taken up by the automatic tensioner.
Movement of the automatic tensioner assembly during engine operation is not a sign of a malfunctioning tensioner. This movement is the tensioner self-adjusting and is required to maintain constant belt tension.
The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
0900c1528008d836.jpgFig. 11: Drive belt routing-2.0L SOHC engine with A/C 0900c1528008d837.jpgFig. 12: Drive belt routing-2.0L SOHC engine without A/C 0900c1528008d838.jpgFig. 13: Drive belt routing-2.0L DOHC engine

Jul 24, 2008 | 1999 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

2,467 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

67912 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22011 Answers

Fordexpert

Level 3 Expert

5367 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...