Question about 1989 Ford Bronco II

1 Answer

Bronco II transmission

My 1989 bronco II wont shift into drive from 2nd gear. the other gears seem to work fine

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

1986 Ford Bronco II, 6 cylinder, standard tran, There is no 1st or 2nd gear.

Posted on Dec 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission shifting problems


Yes ,you need to replace only ,after checking vacuum line that runs to it and make sure it's working correct

Apr 14, 2014 | 1998 Ford F250 SuperCab

1 Answer

1990 Ford Bronco II manual transmission extremely hard to shift will not go into reverse


90 Ford Bronco II: You have to put it in whichever gear you want it in before you start it or it wont shift at all. Then once you are going its extremely hard to shift into the other gears. Reverse is the only gear that sounds like its grinding.

Aug 16, 2013 | 1990 Ford Bronco II

1 Answer

1989 bronco ii wont shift


Without more info on this i would not be able to assist you. I would say the new transmission or used or rebuilt is defective.

Sep 05, 2012 | Ford Cars & Trucks

1 Answer

94 Bronco Tranny issues. Shifts hard from 1st to 2nd, drove it in the morning and all was fine.. drove it in the afternoon and the tranny was acting up with the speedometer working occassionally. What to...


As easy as it sounds, if you haven't done it already, just check your transmission fluid level. A low level will cause hard shifts, and sometimes some slippage in the transmission. The difference in the 2 trips could be just how hot the transmission fluid gets during the type of driving you do.

Apr 01, 2010 | 1989 Ford Bronco II

1 Answer

Won't come out of 4 low and won't change from 1st to 2nd gear


try checking your auto trani fluid... and with the 4 wheel drive try puting ti in nuteral and if the doesnt work try puting it in reverse and back up after taking it out of 4 wheel drive.

May 24, 2009 | 1996 Ford Bronco

1 Answer

Bronco II: automatic Transmission slow to shift gears


replace the torque converter or try to get the transmission flushed first by a professional auto trans outfit

May 05, 2009 | 1989 Ford Bronco

1 Answer

1988 bronco automatic transmission


3rd and 4th gear clutches are the same. The overdrive section is worn out thus resulting to this problem. have the transmission repaired with a new overdrive section.

Mar 05, 2009 | 1988 Ford Bronco

1 Answer

Ford Bronco II standard tran. Has no 1st or 2nd gear.


Replace the transmission fluid. I think those used ATF, but check to be sure. (if you made the mistake of using 80/90w drain it...those transmissions were not designed for 80/90w. gear oil)

Dec 02, 2008 | 1989 Ford Bronco II

1 Answer

1995 Ford Bronco dies when coming to a stop.


The idle air control solenoid could be bad. give the engine a vacuum leak and see if that helps any

Oct 15, 2008 | 1995 Ford Bronco

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

427 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...