Question about 2006 Renault 18I

2 Answers

Rear lights renault master

Could you please help , my mini bus when i press the breaks lights my reverse lights go on with the breake lights and when i switch on the night lights the reverse lights go on it all started when i sent my bus for a service. at renault israel i was told it was the tow bar socket wa cousing a short so i asked them to disconnect it.i need help to find out how the wiring runs to the fuse box and what side of the bus.

Posted by on

  • Anonymous Mar 27, 2014

    where do they hide the reversing light fuses

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Are you sure you havent put a wrong bulb in (a single element when it should be a double element or the other way round)

Posted on Nov 24, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 54 Answers

Its more than likely the earth wires for the lights. unplug the lights and chec the connections visually for corrosion or burnt. the white wire on either side is the earth. get some electrical cleaner and spray the connections. should solve it

Posted on Aug 22, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My reverse lights dont come on while in reverse and i dont need to have my foot on the break to shift out of park.


Yes it could be a relay, but it could also be two isolated problems. The shift will have a switch inside to send a signal either through a relay or directly to the reverse lights. I would suspect the switch. The switch itself may be good but it is not being depressed for some reason. The brake also has a switch. It may be working for the break light but not for lock out of the starter.

Nov 25, 2013 | 1999 Pontiac Grand Am GT

1 Answer

When i press break reverse light come on


what have you done to inspect the wiring? You got a short somewhere and should inspect
have your ecently changed the tailights or doen siimlar work in the brake light area? Have you tested the brake light switch & wiring for a short? Have you inspected the reverse light switch & wiring for shorts?
As always,. more specific details gets more specific solutions
Best regards
Ck

Jul 17, 2012 | 1992 Lexus Ls 400

1 Answer

None of my tail lights work. i changed the bulbs, tail light control board and fuses. I'm an electrician so i need a wire diagram of a 1996 chevy suburban


Your solution is a new combination switch,It also sounds like the hazard are activated and is non operation interfering with the brake light,but either way the solution is a combination swith

Jul 08, 2012 | 1996 Chevrolet Suburban

1 Answer

Both of my break light are not working. what should i do?


If you look under your dash you will see a black box very small on the arm of the break peddle. As you press the break down the switch has a small button that releases causing the break lights to come on and you release the breaks the toggle switch is pressed back in to turn the break lights off. The wire that goes to the break switch may have backed out wiggle the wire and press in gentley get some one to check the breaks if this does not work the switch is most likely bad,,,,,also check your fuses


GOOD LUCK

Nov 30, 2010 | 2004 Hyundai XG350

1 Answer

I can't really describe my stop light switch, all i know is i have to press the break pedal all the way down for the break light come up or put the car on reverse my car is a LINCOLN AVIATOR 2003 (2WD)


If you have to press the pedal all the way down then chances are there is no adjustment left to make at all on the brake switch.Best to replace it with a new one.This is a simple repair, should take about half an hour for you.Remove the pigtail connector and pop out the switch.This switch is on the brake pedal itself, towards the top of the pedal.

Nov 24, 2009 | 2003 Lincoln Navigator

1 Answer

The break lights don't work


brake light switch or bad groung at the lights

Aug 07, 2009 | 2004 GMC Envoy

3 Answers

1997 Cadillac Catera Brake lights continually engaged at night


The problem is in the stoplight switch. It is located under the dash. When you push the brakes, the switch contact points close. When you let off the brake, the open, turning the brake lights back off. Also your cruise will not work if it is getting a signal that the brake pedal is being pushed.

Apr 29, 2009 | 1998 Cadillac Catera

1 Answer

The reverse lights and heater stay on after the car is off.


It isn't a fuse. A fuse will break the circuit if it is drawing too much power. What you have is circuits that are connected by the ignition switch, that should be disconnected when the key is off. This means that the ignition switch is not operating correctly, and either needs adjustment or replacement.

Mar 14, 2009 | 1999 Ford Expedition

1 Answer

Break lights


welcome to fixya

there is a break switch under the dash connected to the break itself once you press the break the switch trips and the lights go on it sounds like that switch is gone you need to replace

hope this helps you out have a good day

Jul 11, 2008 | 1995 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
Cars & Trucks Logo

350 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

xxxxxx xxx

Level 3 Expert

5013 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...