Question about 1991 Honda Civic
I have a 91 civic si hatchback, a couple months ago i was working on it and blew one of the fuses that allowed the car to start. i wasn't aware that it was a fuse that kept it from running and it has been sitting for about 4 months, about 2 weeks ago i replaced the fuse and tried to start it. the car started and then i turned it off. it has not been able to turn over at all sense. The car is getting power to it, i just cannot figure out why it won't turn over. Is it the starter? Please help!
First you have to check if the starter makes any clicking noise.
Check if the starter turn makes any turning noise, and then check the battery.
Check the earth connection from the battery to the chasis.
Check the connection from the battery to the starter.
If the starter doesnt make any noise that means theres no power coming in from the switch that will turn on the solenoid.
If the solenoid is damaged that means the starter motor will never work.
If the starter makes the clicking noise when you turn on the ignition switch and it still doesnt turn, that will tell you that you will need to overhaul the starter, its a starter problem.
You will need to buy a second hand or overhaul the starter.
Posted on Aug 21, 2008
Possibly could be the starter. About the only this I can tell you to try would be to tap on the starter wile someone else is trying to start it. If if cranks, you will need a starter. This is the easyist way to check it without a machine.
Posted on Aug 21, 2008
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I don't believe you do. You may have to take several of the clips or screws out, that also help to hold the bumper cover on , but that should be it
Posted on May 03, 2009
You will need something to lift the engine so that you can take the pressure off of the mount. It sounds like your fuel pump may be wearing out and it is not responding like it should...The pump on the gas tank should be located on the top of the tank....Under the back seat....
Posted on May 24, 2009
SOURCE: how do i change the
take out the bolts that hold the struts ***. to the spindles. tie rod loose -brake caliper off pull out off way after taking nut off at the end of axle. pry bar pop axle out of trans.
Posted on Nov 12, 2010
Tips for a great answer:
Mar 18, 2011 | 1991 Honda Civic
Dec 10, 2009 | 1990 Honda Civic
May 07, 2009 | 1990 Honda Civic
May 03, 2009 | 1991 Honda Civic
May 03, 2009 | 1998 Honda Civic
Mar 19, 2009 | 1991 Honda Civic
Feb 15, 2009 | 1990 Honda Civic
Jan 06, 2009 | 2003 Honda Civic
Feb 11, 2017 | 1991 Honda Civic
296 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: