- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
relay that controls the speed of the radiator cooling fans must be checked Air conditioning works when theAir conditioning works the relay is stuck ON for the fans cool two radiators (ac + main radiator)
The answer to that is NO!
There are two fan motors on that area. One is for the radiator cooling system and the second is for the condenser( Airconditioning system ).
The radiator fan starts/run when the engine temperature reaches a certain temperature( electric thermo switch on the radiator ), while the A/C fan starts whenever you switch on the a/c.
Hope that clears up everything.
Thanks for asking FixYa!
Although the 4 cylinder is too underpowered to have air conditioning in my opinion, it still shouldn't overheat within 10 minutes unless something is wrong. If your Jeep doesn' not overheat when you are driving WITHOUT AC on then your compressor might have a problem and causing the engine to work too hard to turn it.
But if it overheats without the AC on, then the first thing you need to do is check the cooling fan and see if it operates! There has been a lot of problems with the cooling fan relay on this model. If that isn't it, then move to changing the thermostat and checking the water pump.
its prob the cooling fan its located in a housing along with the radiator fan at the front of your engine bay look down when you open the hood . and make sure the fan is spinning run the ac on high and wait ( do this while the car is running of course ) . do not run your ac if the fan isnt working . you will burn up the compressor . the noise and vibrations you feel are from the compressor turning on and off. now if the fan is working its prob the compressor. if all else fails take it to a mech where they can test it ... its not pricey and its quick