Question about 2001 Ford Focus

1 Answer

2003 ford focus ZX5

My headlights do not turn on and when I put the high beams only the left one turns on but the right one stays off. I already took it to a specialist and after checking all the fuses and relays they found that everything was "OK" even the back lights work fine. At the end the specialist concluded that I have to buy a new lever (turn signals). can somebody tell me if this is true? I found it very strange and I wouldn't like to spend more money than what I supposed to...........thank you

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 255 Answers

Hi,, replace the right side bulb at the light , you replace it by the inside ,(hood open) that should do it ,...good luck....

Posted on Aug 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ford 2003 Focus. Low beam headlights not working. Hi beam do. Can get low beam to come on if flip between hi and low but don't stay on.


That sounds like a problem with the high beam switch in the low beam position. The contact is bad or the detent retainer isn't keeping the contact engaged.

Jun 22, 2011 | 2003 Ford Focus

1 Answer

My light problem is i have low beam on right side no low on left side i turn highs on and right side goes out and high on left turns on then when back to lows beams and i pull turn signal to flash high...


If you have separate bulbs for the low and high beams(4 light system), if you pull the turn signal and hold it, all 4 lights will stay on until you release the turn signal. You need to replace the bright bulb on the right side and the low bulb on the left side. If your headlights only have one bulb on each side, then you will have to replace both of them to get everything to work.

Jan 04, 2011 | 2000 Ford Mustang

2 Answers

How to replace a 2001 ford focus headlight switch assembly


p, li { white-space: pre-wrap; }

Turn the engine off, open the hood, and disconnect the negative battery cable (--) with your pliers.



Locate the power distribution box against the firewall on the driver's side of the engine compartment. Flip up the latch and remove the plastic cover.



Determine which headlight fuse you want to replace. The 2001 Ford Focus uses four headlight fuses--one for each headlight. Fuse number 16 is for the passenger side low beam; fuse number 17 is for the driver's side low beam. Fuse number 26 is for the passenger side high beam; fuse number 27 is for the driver's side high beam.



Grasp the fuse with your fingers and pull it straight out of its mount. Insert the new fuse in its place. Replace the plastic cover and reconnect the negative battery cable.

Sep 26, 2010 | 2001 Ford Focus

1 Answer

2001 Ford Focus - High beam / low beam problem with headlights


just replace the dimmer switch under the column its wore out on the low beam side

Jan 17, 2010 | 2005 Ford Focus

1 Answer

Turn Signal Lever 2004 Ford Focus LX


$35 sounds right for the lever. It definitely sounds like it's your lever acting up as the contact seems to be stuck

Oct 02, 2009 | 2004 Ford Focus

1 Answer

2004 ford focus headlight ajust ment


Your adjustment screws should be white nuts (adjustable with an allen wrench, or a socket, or a pair of pliers) located behind the headlamp assembly right up against the fender

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall. You only need to do this and the aiming for your low beams as your high beams are on the same bulb

Your headlights should also say VOR. When you turn on your headlights, aim them right at the mark that you put on the wall, with the brightest cutoff directly under the mark

Sep 18, 2009 | 2004 Ford Focus

1 Answer

2001 ford focus headlights


check the hight beam switch and see if it is broken, when you pull on it to turn on the hight beams it should click if not replace the switch and your problem whould be fixed

May 19, 2009 | 2001 Ford Focus

1 Answer

Ford Focus Flight 2005


The main/high beam relay/switch must be stuck on high presuming the high beam stalk selector does not operate. Probably needs replacement.

Oct 17, 2008 | 2005 Ford Focus

2 Answers

Ford ranger headlights


check your head light switch

May 25, 2008 | 2003 Ford Ranger Regular Cab

Not finding what you are looking for?
2001 Ford Focus Logo

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...