Question about 1989 Chevrolet Beretta

1 Answer

My 1989 chevy beretta will not go in gears i have fluid it was going in drive but now it locked in a gear and would not go.

Posted by on

  • chattendorf Sep 10, 2008

    seems as if it is havin trouble some with changin gears do i need to add fluid f so which kind do i add

  • Matt May 11, 2010

    Is this a manual tranmission?



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

I actually have the same issue with my '90 Beretta. I have not yet had the time to look at it but I could suggest that either your master or slave clutch cylinder is shot or your clutch linkage needs to be tuned/replaced. A Master clutch will run about $50.00 at your Autozone or Advanced Auto, and the slave is about $40.00. I'm not sure wht the linkage will run you, nor do I know the cost of repair if you decide to have a mechanic fix it for you.

Posted on Feb 25, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Brakes went out while driving

Assuming your brake job was good, you probably have a brake line leak. You should have noticed a low pedal and checked the brake fluid level. If low , their is a leak and it must be fixed right away.

Dec 15, 2013 | 1989 Chevrolet Beretta

1 Answer

1989 chevy 1500 wheels wont spin in any gear

check transmission fluid first if low level off --may need a fluid and filter change--internal gear problem

Jun 01, 2017 | Chevrolet 1500 Cars & Trucks

2 Answers

My 1989 chevy blazer goes into neutral instead of third gear and overdrive. 1st and 2nd gear work fine. What could cause this? Is it my torque converter or transmission?

You could pull the trans pan and remove the valve body, and clean.

Not the converter,it is there to build pressure, to supply the valve body and apply fluid to clutch drums, that apply pressure on the clutches for each gear.

If you do remove the valve body to clean, you will need a picture of where the check balls go,when you replace it. Put assy trans lube or vasoline on balls to hold in place. Your working upside down unfortunately.

If the shift valves are free,no sediment, your out of options, unless a servo valve is hung up and doesn't apply a band. They out it comes,and you take it apart,to find the issues

Don't recall solenoids,other than for converter lock-up, back in 1989. Someone else may add to my theory.

Sep 16, 2010 | 1989 Chevrolet S-10 Blazer

1 Answer

1993 beretta manual transmission fluid type

Check with your local parts store they should be able to tell you the recomended fluid.I have 95 GMC that takes synthetic,so not sure when they changed from 80/90 gear lube to synthetic.

May 18, 2010 | 1993 Chevrolet Beretta

1 Answer

Hi i have a 1989 cavalier 2.0 rs with a 5 speed transmission and just today i was driving along and was driving and shifting fine until i went to shift it into forth and it will not go into forth gear at...

I had this problem in my 89 beretta, the clutch plate messed up and it would not go into 3rd. you might as well just replace the whole clutch, there was a recall on the plates and other components for that year. hope this helped

Jan 20, 2010 | 1989 Chevrolet Cavalier

2 Answers

Rear end locked up

you will probably find damage in the differential. remove cover and inspect.on one of the bolts there should be a metal tag with numbers on it .dont lose. you will need to order gear set.

Oct 04, 2009 | 1989 Chevrolet Suburban

1 Answer

Yes I have a 1990 chevy beretta. every time I drive with it in first and second gear it pops out of gear

the sycronizers are bad,and need to be replaced,or another transmission put in.

Sep 24, 2009 | 1986 Ford Mustang

1 Answer

Transmission will not go into gear

replace tranmission filter and flush your trans mission and add some lucus tranny stop slip with new trans mission fluid

Apr 27, 2009 | 1994 Chevrolet Beretta

1 Answer

Rear wheel lock up/driver side/2wheel drive

spider gears in rearend r broken and binding up on the ring gear

Dec 19, 2008 | 2003 Chevrolet Silverado 1500

Not finding what you are looking for?
Cars & Trucks Logo

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides