Question about 1998 Acura Integra Type R

2 Answers

Transmission i have a 5 speed transmission an im thinking im needing to put fluid into it but there is no dipstick for it... how would i go about adding transmission fluid to the tranny?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

No Dipstick? Or Hard To Find? , On Mine You Open Hood Its Right Below My Intake, Hard To Get To Though..

Posted on Jan 02, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 86 Answers

Get chilton's repair manual that covers your car to find the sight/fill hole location. Autozone has This should not really be attempted by a novice since it will require the the car be placed on jackstands or a lift.

Posted on Aug 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I cant find the dipstick to check the transmission fluid in my 2000 dodge ram truck its a manual 5 speed plz help me


If it's AUTOMATIC , then NO DIP STICK , as transmission fluid is put in, and capped , as it does not need replacing , like Engine oil.

Mar 14, 2015 | Dodge Ram Cars & Trucks

1 Answer

My 2005 Chevy trailblazer seemed like it was having trouble shifting gears. I went to check transmission fluid and dip stick broke. I added some transmission fluid thinking that was the problem. With no...


Yes!!!
If you have no junk yard where you can buy a dipstick, see if there is a transmission repair shop where they will sell you or even give you a dipstick from a "core". Short of that, you could speak to someone in a parking lot or a Chevrolet dealership about borrowing their dipstick out of their 2005 Trailblazer just long enough to check your fluid, and then give it back to them. If you get a dipstick that is the wrong length, sometimes you can re-mark it to fit your transmission with a nail-file or something.
Be blessed.

Nov 08, 2013 | Cars & Trucks

3 Answers

Where do you put the automatic transmission fluid in


In the same hole the dipstick for the transmission is in. Small funnel works the best to minimize spillage. Also make sure you check the level of the transmission while the vehicle is in park and running and engine hot. Avoid over filling by adding small amounts at a time and re checking.

Mar 15, 2011 | 1995 Chevrolet Cavalier

2 Answers

Automatic Transmission 97 metro


Hi:
Specifically, you remove the transmission dipstick and use a narrow funnel to pour transmission fluid in the transmission till it is full. Remember to check your fluid level after the transmission is warmed up, and the car is running, gearshift in Park.

May 06, 2010 | 1997 Geo Metro

1 Answer

How much fluid do i put in after a fluid and filter change transm


If you are just dropping the pan and changing the filter it will probably take aprox. 4 maybe 5 quarts. I would add 4 and check it befor adding more . Just dont actually put it into gear until you know the fluid level is correct. Make sure to give the fluid enough time to get out of the dipstick tube so you get a accurate reading

Nov 18, 2009 | 1996 Chevrolet Cavalier

3 Answers

How do I put tranny fluild in my 1998 Chevy S10 2.2L 5-speed pickup?


The filler plug is on the driver's side of the tranny. It looks exactly like the drain plug on the bottm of the tranny.

Automatics use the dipstick tube, manuals do not have a dipstick.

Jun 16, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

Im leaking transmission fluid is this going to be costly


Is it a 3 speed or a 4 speed. Can you tell where the leak is coming from. You need to add until it reads full on the dipstick when it warm and running.

May 10, 2009 | 1993 Chevrolet Lumina

1 Answer

Where do I check the transmission fluid on a 1997 Hyundai excel


Remove Transmission Fluid Level Check
Locate and remove the transmission fluid level checker, in most cars and trucks this is where the fluid is checked and added.
1687565.jpg
Insert fluid funnel and add transmission fluid until the proper amount of fluid level is reached. Let engine warm and recheck fluid level, add fluid as needed. Do not over fill the transmission, it could foam the fluid and cause low fluid pressure causing premature transmission failure. recheck transmission for leaks and recheck fluid level in a couple of days.

DIAGNOSIS AND TEST FLUID LEVEL AND CONDITION
1. Park the vehicle on a level surface. 2. Before removing the dipstick, wipe all dirt from the area around the dipstick. 3. With the selector lever in "P" (Park) and the parking brake applied, start the engine. 4. The engine should be running at idle speed and the fluid should be at normal operating temperature [80-90°C (176-194°F)]. 5. Move the selector lever to every position to fill the torque converter and hydraulic circuit with fluid, then place the lever in the "N" (Neutral) position. This operation checks that fluid level check is accurate. 6. Check if the fluid level is in the "HOT" range shown on the dipstick. If the fluid is low, add automatic transaxle fluid until the level reaches the "HOT" range.
ab7f169.gif

Aug 13, 2008 | Hyundai Excel Cars & Trucks

Not finding what you are looking for?
1998 Acura Integra Type R Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...