Question about 2001 Hyundai Elantra

2 Answers

Car won't start

My car will turn - but seems not connecting to start the engine. What could that be?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

Check the crankshaft sensor they go bad very easily

Posted on Aug 20, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 335 Answers

There are several things this can be;
Fuel pump or the filter
Fuel injectors ,plugged or not being controlled by the computer
Ignition System or no power to the ignition system
Timing belt jumped
Plugged Cataluyic Converter not allowing the engine to "breathe" diagnostic testing must be done to determine which of these is the cause and why.
But do not just change parts based on a friends previous experience there can be two identical cars same symptoms and two totally different problems.
Please rate me as fixya! Thank you

Posted on Aug 20, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Automotive electrical problem


Daniel, If battery is known to be good, could be bad connections at battery, starter/solenoid, or ground on engine/frame, battery cables also could be bad with build up of corrosion internally. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Engine Won Crank or Start
Diagnostic flowchart for car that won start or stalls Troubleshooting for...
No Crank No Start Diagnosis EricTheCarGuy

Aug 21, 2016 | 1988 Ford F 150

2 Answers

Won't turn over


Even though all your other electrical bits are working it could be that your battery doesn't have enough juice to crank the engine. It doesn't take much power to run the radio, lights, etc, but cranking the engine requires the battery to have a very strong charge. If your battery is more than 5 years old, that's very likely the issue. I'd start there. Also, be sure to check the battery terminals and ground for corrosion and clean if necessary. If replacing the battery doesn't solve the problem it could be the starter solenoid or a loose electrical connection somewhere.

Apr 30, 2013 | 1999 Volkswagen Beetle

1 Answer

2003 Nissan Murano - Car turns over but won't start


the engine turning over is not a starter problem
flooding is , broken timing belt is , no fuel pressure is , no fuel in the tank is
have the fault codes read to determine the fault

Dec 13, 2017 | 2003 Nissan Murano

1 Answer

2008 escape hybrid won't start when you turn the


I am not familiar with hybrids, but i think when you start, it's starting with the battery, so I think you have a bad connection, check and clean the battery terminals.

Mar 25, 2013 | Cars & Trucks

2 Answers

2001 GMC jimmy won't start. New starter, new


If the starter motor is turning the problem may be a broken flywheel tooth. If starter is not engaging the solenoid may be bad or not hooked up but that seems unlikely since starter was replaced. The problem's down there. If solenoid not clicking then problem may be further back.

Jan 15, 2013 | Cars & Trucks

1 Answer

Srs light, crazy odometer then no read outs, engine stalls won't start


Check the battery and alternator wiring connections. Also, check the alternator belt. If it is missing or has no tension, the belt tensioner may be broken. The thumping seems to imply a catastrophic mechanical failure or a small explosion affecting the electrical system, but it may have been unburned fuel igniting in the catalytic converter due to a problem with the engine computer (perhaps it wasn't working right due to the electrical problem).

Jul 09, 2017 | Mitsubishi Cars & Trucks

1 Answer

Battery is new, engine won't turn over.


The voltmeter should only go as high as 14-15 volts when the engine is running. I would check for a poor connection between the battery and starter.

Oct 10, 2017 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Have a '94 S-10 Blazer Tahoe 4X4 and it starts


My suspicion is a starter going bad. Sometimes when starters get old and worn they will start good when the engine is cold but not when the engine is warmed up. Did you perhaps notice that lately is seemed to drag when you tried starting, especially warm or it seemed to crank a little slower? I'd replace the starter. Hope this helps.

Aug 14, 2011 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
2001 Hyundai Elantra Logo

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

77514 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...