Question about Mercedes-Benz G-Class
SOURCE: Headlamp bulb replacement
I know it sound obsured but i found the easiest way without damaging anything or your hands is to take the front bumper off, it's about two hrs work.
Really there is no easy way unless you can find somebody with really small hands and even then its hard.hope this helps
Posted on Jan 20, 2009
high i have a 2002 merc vito. there is exaust fumes coming through the air vents when moving. i have to keep the air circualting with in the cabin to stop it, but does any one know how to fix my problem?
Posted on Aug 24, 2009
FIRST DISCONNECT THE LIGHT FROM THE POWER ON THE LAMP YOU ARE TRYING TO REPLACE. It is a plug type that will pull as the sides are pushed. NEXT, The light will have a WIRED brace holding it on. Look closely. Pushed the WIRED brace at an angle and wiggle it. After it comes off and hangs there like a latch, turn the receptacle of the actual light counter clockwise and it will come out. Replace bulb and do the same thing opposite of what I explained.
Posted on Sep 07, 2009
1.)its the alarm system cant be nuffin wrong with the starter motor i had i problem i changed the battery put a new one on and it did it so all i did was put a switch on the wire were you connect the battery very time you get in the car switch it on and strat the car in one go but evey time your job is finshed with the car switch it off but your alarm system anit gona work then
2.) but a extra battery pack the ones they use on sound systems in cars
Posted on Mar 29, 2010
Under the hood, there are two round head lamp covers on each side. One for high beam and one for low beams. The low beam is the outer cover. Turn this cover counter clockwise and remove. This will expose the back of the bulb. There is a small clip holding the bulb into the headlight housing, but you must unplug the light before removing clip. Once you have unplugged the light, the small metal clip can now be undone. on the side opposite the hinge, push the clip in towards the casing and then to one side (which way to push depends on which light it is.) Then the clip will release. you can now remove the bulb. place new bulb in and make sure it securely fits into position. reinstall the clip and reconnect the power. check for propeer function of the lamp before replaceing the cover. Once you confirm lamp is working replace cover and you are done.
This is easiest to see on the passanger side light. The driver side is slightly more cramped.
Posted on Jan 07, 2011
Tips for a great answer:
Oct 05, 2013 | Cars & Trucks
Jul 25, 2013 | Hummer Cars & Trucks
Mar 23, 2012 | 2006 Mercedes-Benz Vito 112
Aug 03, 2011 | BMW Z3 Cars & Trucks
Oct 05, 2010 | 2004 Land Rover FreeLander
Mar 19, 2010 | 1999 Suzuki Swift
Oct 08, 2009 | 2006 Peugeot 604
Aug 21, 2009 | 2002 Ford SVT Focus
Jan 02, 2009 | 2005 Chevrolet Impala
381 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: