How do you reset the traction control - 1998 Lincoln Continental

Visit a Subaru garage for advice. Possibly a reset with their SnapOn OBD reader will suffice, if it is nothing else.

TC is a known issue. Some video help and specialist forums

https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk00G6vXe1GcmC2KDTtKfW6-ItaHEsA%3A1609272543964&ei=34zrX5isOta3tQb-2b24DA&q=2007+G6.+reset+traction+control

..

Resetting traction control message on the DIC ? Service traction control ? ETC...

when the traction control is activated , there is a reduction of power from the engine to compensate for that lost traction control
run the fault codes , repair the reason for the traction control light and then reset the computer using a scan tool and the engine power will return

Most likely the air induction probably needs to be programmed into the ECM. But also you may have jounced a wire that has a connection to traction control and it is setting it off. Otherwise, you may have a standard trAction control problem that has to be addressed in the shop.

traction control faulty. You slip and slide, your traction control activates, then here lies your problem.. after your traction control activates, it is creating an electrical short, vacuum leak, etc. look at what your traction control is operating, probably brakes. SO look at the brake booster vacuum lines or connecitons. Hope this at least gives you an idea of where to look. COuld be your traction control module is faulty.

Very common. Bad wheel speed sensor. Read this
http://ricksfreeautorepairadvice.com/abs-light-on-traction-control-off-gm-products/

ABS light on Traction Control Off GM products Ricks Free Auto Repair Advice

A pocket scanner does not have the capability reset the traction control or the ABS light. You need an expensive scanner for that.

I have a 2001 Cadillac Deville with 105,000 miles. The ABS and Traction Control light stay on. What could be the problem? Could I reset the ABS and Traction Control light?

An ABS sensor DOES affect the traction control system. Traction control uses these sensors to determine if a wheel is losing traction. A bad sensor will cause both the ABS and TRACTION lights to come on.
The CHECK ENGINE light however is going to be a seperate problem.