Question about 1993 Jeep Wrangler

1 Answer

Windshield wipers stopped working

Hey i have 93 wrangler and when i first got it 2 years ago they were fine. last winter the slow speed and delay stopped workingand the fast speed only worked then 2 weeks ago the fast speed stopped working too. but what confuses me is they ocassionally work and the randomly kick on and off if the switch is on. has anyone had this problem and if not suggest what is wrong?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 89 Answers

Quite possibly and most likely your problem is in the switch itself and needs replaced hope that helps you

Posted on Aug 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My front windshield wipers will only work on high. Any suggestions?


Search Results

    My windshield wipers only work on high speed...? ' Yahoo Answers

    https://answers.yahoo.com/question/index?qid...
    Nov 11, 2006 - My windshield wipers only work on high speed. ... If it's the compound switch on the lever on the steering wheel, it can be a bit complicated to ...

    Windshield wipers - CarGurus

    www.cargurus.com > Questions > Mercury > Grand Marquis

    CarGurusMay 19, 2015 - Windshield wipers - My wipers stopped last week and the next day they ... slow or intermitt and only work on high speed and the washer wiper doesn;twork ... The LCM does not effect the operation of the motor or switch it just ...

    Windshield Wipers only working at highest setting - Ford Flex Forum

    www.fordflex.net > ... > General Ford Flex Discussions
    Feb 16, 2011 - Windshield Wipers only working at highest setting ... rear wiper worksjust fine, just the front wipers only work at highest setting. ... the wipers sometimes grinds out the gears thus only working at high sppeds. If it is the motor or Transmission for the wipers, can I fix this myself and how much would it cost me.

    Common GM Wiper Problem - YouTube

    ? 3:23
    https://www.youtube.com/watch?v=kc6e2Tmar68
    Oct 25, 2010 - Uploaded by roadragecustoms
    The windshield wipers only worked occasionally. ... My 1998 dodge ram wipers only work on high will this help me? thanks.... Express van. you have to take out the motor and the transmission from under the front of the van..

Feb 09, 2016 | Cars & Trucks

3 Answers

How do I fix the speed of my windshield wipers, they only work on high speed and I have replaced the windshield wiper motor and that did not help?


In that year they used a wiper control module and the switch to control speeds and delay interval. The part is obsolete at the ford dealer and you may have to resort to salvage yard for part.

Feb 23, 2015 | 1988 Ford Bronco II

2 Answers

Intermittent wiper


what car, what year? gee? a suz, what?
it can only be 4 things. (all cars)
1: the wiper motor is bad. (it has contacts inside for timing.
2: the wiper shaft is stripped, nah you said both stalled.
3: the wiring is bad.
4: the combo switch for the above is bad.

DIY, with what , no tools? no meter.?
with no tools one can only GUESS,
roll dice, and replace a part.
after spending $500 on parts and the wires are good then what.
yes, buy a meter.

it could be a bad ground wire.

when you turn on most wipers, the combo switch sends
that signal( just 12v ) to the motor.
the motor is self booting, that is , it only needs the start up
and then it self provides its own power,
ive restored wiper motors, many.
then the motor runs until it his the dead spot in ITS, internal
sustain switch and the halts. if the combo switch is off.
but if the wiper fails to return, this is a bad wiper motor.
(overloaded by ice, sure)
the motor can fail 2 ways, but
id say the sustain switch is at EOL. end of life.

this is the most common design.
check your FSM for yours. the factor service manual.
or alldata dot com. sure.

Sep 25, 2013 | Suzuki Cars & Trucks

1 Answer

The whipers on my 93 jeep wrangler wont work


when they do not work turn the key to the run position, the vehicle does not need to be running, and the wipers set to high speed whack the wiper motor with the handle end of a large screwdriver. if the motor starts to work replace it.

Nov 30, 2012 | 1993 Jeep Wrangler

2 Answers

I have a 1990 yj my wiper motor sounds like it works but wipers dont move how do i fix this


How do I get to the windshield wiper motor on a 1990 Jeep Wrangler?

Nov 15, 2010 | 1990 Jeep Wrangler

2 Answers

My windshield wipers will not work on variable speed. Only the fast and slow speeds work and when switched to the variable speed position they stop instantly in middle of the windshield. Replacing the...


Alarm control unit has a chip in that controls the delay wipers, this chip cost about 2 dollars, but it has to be sodered in. the whole box cost about 200 dollars. It is located behind the glove box on above the right kick plate ive been told. chip can be bought from mouser.

Dec 09, 2009 | 2002 Isuzu Rodeo

1 Answer

Plymouth Grand Voyager SE, 1997. 3.0 litre


check to see if you have life at the wiper motor plug.if not.you have a dodgy switch.

Jun 10, 2009 | 1997 Plymouth Grand Voyager

1 Answer

Intermittent windshield wipers


It sounds like the circuit board to the wiper module is cracked or has bad connection. There was a recall a few years back on certain GM model for this. I know you can get one at Auto Zone and they can give you the step by step instruction to replacing it.
Most of the time, the problem is the connection at the solder joint. Its a easy fix if you have a soldering gun and solder, just solder the break in the board or replace it.
Good luck and hope this helps.

May 29, 2009 | 2000 Pontiac Grand Am GT

2 Answers

Wipers stop mid windshield in off position


replace the wiper motor, on the motor there is a board that tells the motor how fast to go, there may be a lose wirer and also check your plug on the motor make sure of no bad wires.

Mar 11, 2009 | 2002 Buick Regal

Not finding what you are looking for?
1993 Jeep Wrangler Logo

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...